Thursday, December 30, 2010

New Arrival! 1/35 Tamiya Tanks

New Arrival! Tamiya Military 1/35 Kampfpanzer LEOPARD Tank 35064


Tamiya Military 1/35 Kampfpanzer LEOPARD Tank 35064
Available at http://www.rcecho.com/tamiya-military-1-35-kampfpanzer-leopard-tank-35064.html
Available at http://www.rcecho.com/tamiya-military-1-35-kampfpanzer-leopard-tank-35064.html

Specifications
Scale: 1:35
Material Plastic

About the Kampfpanzer LEOPARD Tank
Defeated in World War II, Imperial Germany completely collapsed and its territory was divided into two spheres, liberalist and communists. Then in 1955, West Germany was admitted to the Western European Alliance and the West German Defense Forces was re-established as a new member of the NATO powers.


As West Germany is adjacent to the communist sphere, problems on national defense was much thought of. To defend the border-line an armoured unit was established. The German techniques by which the Tiger, Panther and other excellent tanks were produced was succeeded by this Leopard tank that appeared in 1961 in West Germany. Leopard also has the name of `Standard Panther`. It was prototyped in 1961 and 1962 and was formally adopted by the West German Army in 1963, prior to the adoption of the French A.M.X. 30. In 1964, the West German Army placed an order for 1,400 of this tank and the first tank, mass produced, was delivered by Krauss Moffei in Munich.


The crew of the tank is four and L7A 1 105mm gun made in Britain is used as its main gun which is common to tanks of the NATO forces and has the same destroying power as that of the British Centurion, U.S.A. M60 and Swiss Pz 61. Its shooting sight is based on a range finder system and it can shoot a target at a distance of 1,000 meters even at night by simultaneous use of infrared rays. Its engine is a water-cooled, 10 cylinder multi-fuel engine by Mercedes Benz.


The maximum high speed is 65km/h. Not only diesel oil but also gasoline and fuel for jet engines can be used. Its chassis and body is water-tight so that it can cross rivers at a depth of 4 meters underwater. Thus, this tank is a modern excellent maneuverability tank of which importance is attached.


Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting.
The photo is for reference only.



New Arrival! Tamiya Military 1/35 German Sd.Kfz.142 Tank Model 35281


Tamiya Military 1/35 German Sd.Kfz.142 Tank Model 35281
Available at http://www.rcecho.com/tamiya-military-1-35-german-sd.kfz.142-tank-model-35281.html
Available at http://www.rcecho.com/tamiya-military-1-35-german-sd.kfz.142-tank-model-35281.html
Specifications
Scale: 1:35
Material Plastic

About the German Sd.Kfz.142 Tank
After debuting to great acclaim in our 1/48 MM Series, the popular Sturmgesch`tz III (StuG III) Ausf. B now makes its way to the 1/35 MM Series. With its short barreled cannon and squat, formidable hull shape, the 1/35 StuG III promises to offer boxful of modeling satisfaction.


Germany`s versatile Stug III was originally designed as an assault weapon, however also came to be used as a weapon of defense as the war progressed, providing both assault gun and anti-tank support. Based on the durable Panzer III chassis, the Stug III featured a monoblock structure with an L24 75mm short barreled gun mounted directly to the hull, eliminating the revolving turret and reducing overall height. The Ausf. B was the first truly mass produced Stug III with 250 produced from June 1940. Featuring wide tracks and powered by a 230hp Maybach HL 120 TRM engine the Ausf. B boasted a top speed of 40km/h. The Ausf. B saw action during the Balkans campaign in April 1941 and Operation Barbarossa in June, 1941. The simple construction leading to low costs and easy mass production made the Stug III one of Germany`s most produced armored vehicles with over 10,000 produced during WWII.

Features
Accurate 1/35 scale model of the German Sturmgesch`tz III Ausf. B assault gun.

Cannon can be raised and lowered after assembly


Includes fully detailed accessories to mount onto fender for full accuracy.


Precision detailing right down to the loading device and wireless radio inside compartment.


Comes with aluminum gun barrel and photo-etched mesh cover for engine air intake.


Employs swing-arm type suspension.


Includes 3 sets of markings and 1 commander figure.


Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.



New Arrival! Tamiya Military 1/35 Panzerkampfwagen III Ausf.N 35290


Tamiya Military 1/35 Panzerkampfwagen III Ausf.N 35290
Available at http://www.rcecho.com/tamiya-military-1-35-panzerkampfwagen-iii-ausf.n-35290.html
Available at http://www.rcecho.com/tamiya-military-1-35-panzerkampfwagen-iii-ausf.n-35290.html

Specifications
Scale: 1:35
Material Plastic

About the Panzerkampfwagen III Ausf.N
The rugged Panzer kampfwagen III was used in all theaters by the German army in WWII and was well-liked due to its reliability. However, the size limitations of the tank`s chassis meant that armament upgrades were limited and its usefulness as a battle tank diminished as the Allies produced more advanced and powerful tanks. With this realization, the final variant of thePz.kpfw.III, the Ausf.N, was modified into an infantry support tank armed with the short-barreled75mm gun from the Pz.kpfw.IV, which was being upgraded with more powerful guns. Beginning from June 1942, 700 of these Ausf.N variants, also known as Sturmpanzer III, were made and were often assigned to independent Panzer Battalions to protect the heavier Tiger tanks. The5mm Schurzen armor skirt modifications were added from the spring of 1943.



Features
High-quality 1/35 scale assembly model kit of the Panzerkampfwagen III Ausf.N.

Detailed short-barreled 75mm main gun includes gun breech and parts for 2 types of mantlet.


Precision-made aluminum parts for main gun barrel.


Turret features accurately reproduced parts for smoke dischargers.


3 types of markings, including one for a tank in North Africa, are included.


One tank crew figure also included and can be depicted with headphones or signal gun.


An excellent piece to display with the previously released Sd.Kfz.222 North African Campaign.


Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.



New Arrival! Tamiya Military 1/35 StuG III Ausf.G Finnish Army 35310


Tamiya Military 1/35 StuG III Ausf.G Finnish Army 35310
Available at http://www.rcecho.com/tamiya-military-1-35-stug-iii-ausf.g-finnish-army-35310.html
Available at http://www.rcecho.com/tamiya-military-1-35-stug-iii-ausf.g-finnish-army-35310.html
Specifications
Scale: 1:35
Material Plastic

Features
1/35 scale plastic assembly model kit.

Length: 189mm, Width: 85mm.


The unique form of the tank destroyer is realistically reproduced.


Distinctive features of Finnish StuG`s such as large concrete armor blocks and logs are also included.


In addition, tools and spare tracks are included for greater realism.


The DT machine gun has a sharp finish.


Commander figure (torso) and four kinds of markings included


Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting.
The photo is for reference only.



New Arrival! Tamiya Military 1/35 U.S. M20 Armored Utility Car 35234


Tamiya Military 1/35 U.S. M20 Armored Utility Car 35234
Available at http://www.rcecho.com/tamiya-military-1-35-u.s.-m20-armored-utility-car-35234.html
Available at http://www.rcecho.com/tamiya-military-1-35-u.s.-m20-armored-utility-car-35234.html

Specifications
Scale: 1:35
Material Plastic

About the U.S. M20 Armored Utility Car
A derivative of the U.S. M8 Light Armored Car Greyhound, the U.S. M20 Armored Utility Car rolled onto the battlefield in 1943. The rotating turret of the M8 was removed, allowing space for passenger seats, a commanders table, radio sets and a ring mounted M2 heavy machine gun. The M20 was mainly deployed to the Tank Destroyer Unit, where its top speed of about 90km/h was taken advantage of in command, cargo, and reconnaissance duties.



Features
This plastic assembly model kit is based on the U.S. M20 Armored Utility Car.

The low body with an open-top has been richly recreated in 1/35th scale.


The passenger seats, folding commander`s table, and radio sets all overflow with authenticity.


Kit also features a bazooka, ammunition cartridges, ring mounted M2 heavy machine gun and other detailed accessories.


Two lifelike figures for the commander and driver are also included


Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.



New Arrival! Tamiya Military 1/35 Russian Tank Destroyer SU122 25111


Tamiya Military 1/35 Russian Tank Destroyer SU122 25111
Available at http://www.rcecho.com/tamiya-military-1-35-russian-tank-destroyer-su122-25111.html
Available at http://www.rcecho.com/tamiya-military-1-35-russian-tank-destroyer-su122-25111.html
Specifications
Scale: 1:35
Material Plastic

About the Russian Tank Destroyer SU122
When confronted by the Sturmgeschutz II, during the German Blitzkrieg on the Eastern Front, the Russian military quickly began to design their own assault guns. The result was a tank destroyer based on the T-34 chassis, which was armed with a 122mm howitzer. The vehicle was named the SU-122 with the letters "SU" standing for self-propelled and the number "122" representing the 122mm howitzer. Assault guns had some advantages over tanks during the war. Due to lack of a turret, the vehicle could be built with larger more powerful weapons with lower production costs. However, the main disadvantage was the entire vehicle had to be moved to aim at a target. The SU-122 was produced from December 1942 until the summer of 1944. Only 1,150 SU-122 tank destroyers were built during this time. In July 1943, the vehicle was used for the first time in the battle of Kursk. This vehicle set the foundation for the SU-85 and SU-100 tank destroyers.

Features
1/35 scale limited edition plastic assembly model kit of the Russian Tank Destroyer SU-122 .


Includes a Weathering Master Set which features Red Earth, Soot, and Sand colors for Russian tanks, to allow you to apply a realistic finish to your model.


This set includes 7 figures.


Length: 207mm.


The welded marks and realistic cast metal texture on gun mount have been realistically reproduced.


The driver`s hatch and fighting compartment hatch can be assembled in either open or closed positions.


The gun can be depressed and elevated after assembly.


Separate parts to depict the stays for spare fuel tanks are included, adding greater realism to the model. You can display your model without the fuel tanks loaded onto the hull.


Because this product is incomplete model,?buyers can enjoy the processes of assembling the model and figure painting.
The photo is for reference only.



Remote Controlled Toys Online Shop: www.rcecho.com
We highly recommend the follow RC TOYS model, We accept Wholesale order worldwide, We also sell onEBAY.COMaccept PAYPAL and Credit Card
APC Electric 11 x 7 E RC Composite Propeller USD4.90 only
AXI Gold Line 2217/20 Outrunner Brushless Motor USD69.90 only
FS FS-GT3B 3ch 2.4GHz LCD Transmitter & Receiver USD42.90 only
Futaba FP-R113F FM 41MHz 3ch DSC Micro Receiver USD57.90 only
APC Electric 9 x 3.8 SF RC Composite Propeller USD4.90 only
XERUN 4000KV Sensored Motor & 120A ESC + LCD Card USD159.90 only
AXI Gold Line 4130/20 Outrunner Brushless Motor USD134.90 only
Futaba Extension Cord 1500mm for Servo & Receiver USD9.90 only
Master Airscrew 3-Blade 7 x 4 Nylon Propeller USD8.90 only
APC Model 8 x 7 RC Composite Propeller USD3.90 only
O.S. SPEED 71410250 HEX 2.5mm Wrench Driver Tool USD22.90 only
Esky FM 41.040MHz Receiver and Transmitter Crystal USD3.90 only
Esky FM 72.830MHz Receiver and Transmitter Crystal USD3.90 only
Futaba CR-2500 Li-ion Battery Charger & Discharger USD108.90 only
Tamiya Modeling No.01 Flat Brush 87028 USD3.90 only
RCS Model C5055 700 KV Outrunner Brushless Motor USD43.90 only
APC Model 9.25 x 5.5 RC Composite Propeller USD6.90 only
RC Model 450 Helicopter T450B18 Canopy Body USD7.90 only
APC Model 10 x 9 RC Composite Propeller USD4.90 only
Tamiya RC 0.5 Steel Pinion Gear Set (20T, 21T) 53081 USD8.90 only

This is our new arrival items



New Arrival! Tamiya Motorcycle 1/12 Honda LCR RC211V 06 Model 14108


Tamiya Motorcycle 1/12 Honda LCR RC211V 06 Model 14108
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide

Specifications
Scale: 1:12
Material Plastic

About the
Honda LCR RC211V 06
A new rider & a new team joining the 2006 MotoGP bring a fresh new color scheme to Tamiya`s 1/12 MotoGP lineup!



2006 saw the introduction of a "new guard" to MotoGP, as Dani Pedrosa and the young Australian Casey Stoner moved up from 250cc class to challenge Valentino "The Doctor" Rossi for his 990cc crown. Also making the move to MotoGP was Team LCR, led by racing veteran and Stoner`s long-time boss in 250cc class, Lucio Ceccinello. LCR paired with Honda to field the powerful RC211V `06 in its final season before the scale-down to 800cc machines. While most of the attention in 2006 was on Pedrosa and Hayden, Stoner put in a strong performance, clearly demonstrating his potential for the future.



Features
1/12 scale assembly model kit of the LCR Honda RC211V `06.

Characteristics of the RC211V`06 such as the refined cowling, triple exhaust system, and the airbox mounted in front of the fuel tank are accurately reproduced.


All new parts depict customized seat cowling.


Bike features all-new coloring/livery scheme of white base with red & black gradations.


High quality Cartograf decals depict No. 27 ridden by Casey Stoner.


Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.



New Arrival! Tamiya Military 1/35 U.S. Military Police Set 35084


Tamiya Military 1/35 U.S. Military Police Set 35084
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide

Specifications
Scale: 1:35
Material Plastic


Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting.
The photo is for reference only.


Remote Controlled Toys Online Shop: www.rcecho.com
We highly recommend the follow RC TOYS model, We accept Wholesale order worldwide, We also sell onEBAY.COMaccept PAYPAL and Credit Card
RC Smart 4890 KV Brushless Motor & 30A ESC USD24.90 only
iMAX B6 Intelligent Digital Li-polymer Balance Charger USD22.90 only
Tamiya Model Weathering Master E Set (Dry Brush) 87098 USD7.90 only
RC Model 98 x 55mm Helicopter Blades Holder USD2.90 only
RC Smart 1600 KV Outrunner Brushless Motor & 80A ESC USD48.90 only
Tamiya Military 1/35 German Sd.Kfz.142 Tank Model 35281 USD30.90 only
RC Model Plane Diameter 30mm 1.2 inches Wheel Tire USD3.90 only
Tamiya Military 1/35 Sd.Kfz.222 LEICHTER Model 35270 USD19.90 only
Master Airscrew G/F 3 Series 6 x 4 inches Propeller USD3.90 only
Tamiya Modeling No.5 Flat Brush 87013 USD3.90 only
AXI Model RMS2820 AXI 2820(26)/xx Radial Mount Set USD12.90 only
EK1-0314 Stabilizer Set Parts for Esky V3 V4 Helicopter USD4.90 only
Corona RP4S1 4ch 35MHz Single Conversion Receiver USD16.90 only
Tamiya Craft Tools Basic Tool Set 74016 USD17.90 only
Tamiya Military 1/35 Russian Tank DESTROYER SU122 89798 USD20.90 only
Dynam RC 8.4g High Speed & Torque Micro Servo USD4.90 only
RC Carbon Plastic 325mm Helicopter Main Blade x4 Blades USD9.90 only
Tamiya Military 1/35 British Tank MKII MATILDA 35024 USD20.90 only
RCS 3950mAh 11.1V 12C LiPo Lithium Polymer Battery USD19.90 only
Corona Model RP6S1 6ch 72MHz Single Conversion Receiver USD17.90 only

Wednesday, December 29, 2010

New Arrival! Tamiya Motorcycle 1/12 Honda REPSOL RC211V 06 14106


Tamiya Motorcycle 1/12 Honda REPSOL RC211V 06 14106
Available at http://www.rcecho.com/tamiya-motorcycle-1-12-honda-repsol-rc211v-06-14106.html
Available at http://www.rcecho.com/tamiya-motorcycle-1-12-honda-repsol-rc211v-06-14106.html

Specifications
Scale: 1:12
Material Plastic

About the
Honda REPSOL RC211V 06
Building on its reputation as the most successful machine in modern MotoGP history, the Honda RC211V is once again at the top of the standings, in the capable hands of the Repsol Honda Team. Consistent finishes have resulted in young riding sensation Daniel Pedrosa, one of the most talked-about riders of the 2006 season, currently holding 2nd place in the standings behind only his teammate Nicky Hayden. With the end of the season just a few races away and new regulations specifying 800cc machines for the 2007 season, Pedrosa looks to hold off other challengers to give Repsol and the Honda RC211V `06 a one-two finish to end the 990cc RC211V`s illustrious career.




Features
1/12 scale assembly model kit of the Repsol Honda RC211V`06 ridden by Daniel Pedrosa

Characteristics of the RC211V`06 such as the refined cowling, triple exhaust system, and the airbox mounted in front of the fuel tank are accurately reproduced


All new parts used for the clutch cover, fuel tank, and other sections


Cowlings can be attached/removed using tiny precision-made screws


Markings for both Daniel Pedrosa`s No.26 and teammate Nicky Hayden`s No.69 included


Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting.
The photo is for reference only.



New Arrival! Tamiya Motorcycle 1/12 Honda LCR RC211V 06 Model 14108


Tamiya Motorcycle 1/12 Honda LCR RC211V 06 Model 14108
Available at http://www.rcecho.com/tamiya-motorcycle-1-12-honda-lcr-rc211v-06-model-14108.html
Available at http://www.rcecho.com/tamiya-motorcycle-1-12-honda-lcr-rc211v-06-model-14108.html

Specifications
Scale: 1:12
Material Plastic

About the
Honda LCR RC211V 06
A new rider & a new team joining the 2006 MotoGP bring a fresh new color scheme to Tamiya`s 1/12 MotoGP lineup!



2006 saw the introduction of a "new guard" to MotoGP, as Dani Pedrosa and the young Australian Casey Stoner moved up from 250cc class to challenge Valentino "The Doctor" Rossi for his 990cc crown. Also making the move to MotoGP was Team LCR, led by racing veteran and Stoner`s long-time boss in 250cc class, Lucio Ceccinello. LCR paired with Honda to field the powerful RC211V `06 in its final season before the scale-down to 800cc machines. While most of the attention in 2006 was on Pedrosa and Hayden, Stoner put in a strong performance, clearly demonstrating his potential for the future.



Features
1/12 scale assembly model kit of the LCR Honda RC211V `06.

Characteristics of the RC211V`06 such as the refined cowling, triple exhaust system, and the airbox mounted in front of the fuel tank are accurately reproduced.


All new parts depict customized seat cowling.


Bike features all-new coloring/livery scheme of white base with red & black gradations.


High quality Cartograf decals depict No. 27 ridden by Casey Stoner.


Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.



Remote Controlled Toys Online Shop: www.rcecho.com
We highly recommend the follow RC TOYS model, We accept Wholesale order worldwide, We also sell onEBAY.COMaccept PAYPAL and Credit Card
Futaba S9155 High Torque Metal Gear Digital Servo USD97.90 only
RC Smart 2350 RPM/V Outrunner Brushless Motor USD11.90 only
RC Plane Model 4mm Hole Blue Metal Propeller Adapter USD3.90 only
O.S. SPEED 71414125 HEX Ball 2.5mm Wrench Tip USD11.90 only
RC Smart 3900 KV Heat Sink Brushless Motor & 30A ESC USD25.90 only
Futaba T4EXA 4ch FM 72MHz Transmitter & R114F Receiver USD93.90 only
APC Electric 9 x 4.5 E RC Composite Propeller USD4.90 only
Tamiya RC Model 1/14 Tractor Trucks Animal Guard 56506 USD25.90 only
RC Smart 1280 KV Outrunner Brushless Motor & 30A ESC USD28.90 only
AXI Gold Line 4120/14 Outrunner Brushless Motor USD124.90 only
AXI Silver Line 2208/26 Outrunner Brushless Motor USD40.90 only
RC Airplane 103 x 90mm Female Blue Cockpit Pilot Model USD18.90 only
Hirobo SRB Quark 0302-015 S.R.B Tail Blade Set 4 Blades USD10.90 only
RC Model 450 Helicopter T450C25 Canopy Body USD7.90 only
AEO 10200KV Brushless Motor 30mm Ducted Fan EDF USD22.90 only
Hirobo Lepton EX 0304-018 Stabilizer Control Arm USD33.90 only
HOBBYWING Platinum 70A Brushless Motor Programmable ESC USD74.90 only
Futaba R133F FM 27MHz 3ch Micro Receiver USD60.90 only
RC Model Multi-Color LED Flash Lamp Set (3pcs) USD4.90 only
Hirobo Turbulence D3 0414-504 RC Helicopter Decal USD9.90 only

This is our new arrival items!!


New Arrival! 2x RC LiPo 2200mAh 11.1V 35C Li-Polymer Battery


2x RC LiPo 2200mAh 11.1V 35C Li-Polymer Battery
Available at http://www.rcecho.com/2x-rc-lipo-2200mah-11.1v-35c-li-polymer-battery.html
Available at http://www.rcecho.com/2x-rc-lipo-2200mah-11.1v-35c-li-polymer-battery.html
Specifications
Dimensions (Length x Width x Height): 110.5 x 33.5 x 23.2mm, 4.35 x 1.32 x 0.91 inches
Capacity: 2200mAh
Voltage: 11.1V
Max Continuous Discharge: 35C / 77A
Max Burst Discharge: 40C / 88A
Number of Cells: 3
Configuration: 3S1P
Battery Connector Type: None
Charge Balancer Type: 4 Ports Balance
Net Weight: 186 grams
Suitable Model: RC Airplane / Helicopter



New Arrival! 5x RCS 1200mah 3.7v 20C LiPo Li-Polymer Li Battery


5x RCS 1200mah 3.7v 20C LiPo Li-Polymer Li Battery
Available at http://www.rcecho.com/5x-rcs-1200mah-3.7v-20c-lipo-li-polymer-li-battery.html
Available at http://www.rcecho.com/5x-rcs-1200mah-3.7v-20c-lipo-li-polymer-li-battery.html
Specifications
Dimensions (Length x Width x Height): 64 x 30 x 7mm
Capacity: 1200mAh
Voltage: 3.7V
Max Continuous Discharge: 25C / 30A
Max Burst Discharge: 30C / 36A
Number of Cells: 1
Configuration: 1S1P
Net Weight: 27 grams
Suitable Model: RC Airplane / Helicopter
airplane helicopter>


New Arrival! 5x RCS 650mah 3.7v 20C LiPo Li-Polymer Li Battery


5x RCS 650mah 3.7v 20C LiPo Li-Polymer Li Battery
Available at http://www.rcecho.com/5x-rcs-650mah-3.7v-20c-lipo-li-polymer-li-battery.html
Available at http://www.rcecho.com/5x-rcs-650mah-3.7v-20c-lipo-li-polymer-li-battery.html
Specifications
Dimensions (Length x Width x Height):?43 x?25.6 x 7.3mm
Capacity: 650mAh
Voltage: 3.7V
Max Continuous Discharge: 20C / 13A
Max Burst Discharge: 25C / 16.25A
Number of Cells: 1
Configuration: 1S1P
Net Weight:?12 grams
Suitable Model: RC Airplane / Helicopter
airplane helicopter>

Remote Controlled Toys Online Shop: www.rcecho.com
We highly recommend the follow RC TOYS model, We accept Wholesale order worldwide, We also sell onEBAY.COMaccept PAYPAL and Credit Card
Tamiya Craft Tools Curved Scissors for Plastic 74005 USD9.90 only
Hirobo SRB Quark 0302-001 S.R.B Seesaw ASSY USD18.90 only
RC Plane Model 3.17mm Hole Blue Metal Propeller Adapter USD3.90 only
FSD Ship 3600 KV Removable Water-Cooled Brushless Motor USD33.90 only
Master Airscrew 3-Blade 8 x 6 Nylon Propeller USD10.90 only
RC Model Limpid 5-6v 3A Receiver & ESC BEC Device USD5.90 only
RC Smart Gold 1185 RPMV Outrunner Brushless Motor USD35.90 only
Corona CT8F 2.4GHz RF Module & CR8D Receiver USD38.90 only
HOBBYWING TEKMODEL Model Program Card for Car ESC USD8.90 only
G.T.POWER A6-D Digital LiPo Li-polymer Balance Charger USD43.90 only
Hobbywing RC Model 5V 0.16A Motor Cooling Fan USD5.90 only
3x RC Model 3.17mm Shaft 12T Metal Motor Gear USD3.90 only
Tamiya Craft Tools Diamond File 74066 USD7.90 only
RC Model Ship 55mm Water Stabilizer Boat Trim Fin USD7.90 only
Futaba S9256 Metal Gear Coreless Motor Digital Servo USD105.90 only
XERUN 5200KV 6.5T RC Sensored Motor & 60A ESC USD111.90 only
Tamiya Craft Tools Safety Goggles 74039 USD10.90 only
KDS Model RC Screw Driver Adjustment Tools (9pcs) USD17.90 only
Tamiya Military 1/35 German Machine Gun Crew 35184 USD7.90 only
Corona Model RP6S1 6ch 35MHz Single Conversion Receiver USD17.90 only

Tuesday, December 14, 2010

Tamiya Military 1/35 MARDER 1A2 Tank Model 35162


Specifications
Scale: 1:35
Material Plastic

About the MARDER 1A2 Tank Model
The highly successful and sophisticated German Marder entered active service in the early 1970`s. It was designed under a concept that departed from previous armored personnel carriers, in that it is capable of offensive and defensive combat operations. It provides good protection to its load of infantrymen from small arms fire, and fallout from a tactical nuclear attack. Designed and developed by the Rheinstahl Henschel AG of Kassel, renowed for their formidable Tiger tanks of WWII, the Marder became such a distinctive armored vehicle, it was classed as a new category, and called the "MICV" or Mechanized Infantry Combat Vehicle with NATO forces. The development of the Marder dated back to the early 1960`s when the first prototypes were built for evaluation. These closely resembled in appearance the HS30, then in service, and having a forward mounted turret. However the powerplant was moved to a right-side midship allowing a rear exit format for the infantrymen. Further improvements and a redesign made radical changes and repositioned the powerplant to the right forward section. The last prototypes offered in the mid 1960`s showed a sleek and sloped front section that provides excellent protection. It is powered by a Mercedes-Benz 6-cylinder diesel engine capable of 600h- that allows a maximum road speed of 75km/h. The Marder 1A2 is an upgraded version that features a "Milan" anti-tank missile system. The Marder, with 20 years in service, is continually being improved to meet the needs of NATO`s long-term strategy.

Tamiya Military 1/35 LEOPARD A4 West German Tank 35112


Specifications
Scale: 1:35
Material Plastic

About the LEOPARD A4 West German Tank
The Leopard tank with a combat weight of 40 tons, main armament of a 105 mm gun and maximum road speed of 65km/h is rated as one of the strongest tanks in the world with excellent fire power, protection and mobility. As a main battle tank, it is being used in seven countires including West Germany, Holland, Italy and Belgium.

Tamiya Military 1/35 Kampfpanzer LEOPARD Tank 35064


Specifications
Scale: 1:35
Material Plastic

About the Kampfpanzer LEOPARD Tank
Defeated in World War II, Imperial Germany completely collapsed and its territory was divided into two spheres, liberalist and communists. Then in 1955, West Germany was admitted to the Western European Alliance and the West German Defense Forces was re-established as a new member of the NATO powers.

As West Germany is adjacent to the communist sphere, problems on national defense was much thought of. To defend the border-line an armoured unit was established. The German techniques by which the Tiger, Panther and other excellent tanks were produced was succeeded by this Leopard tank that appeared in 1961 in West Germany. Leopard also has the name of `Standard Panther`. It was prototyped in 1961 and 1962 and was formally adopted by the West German Army in 1963, prior to the adoption of the French A.M.X. 30. In 1964, the West German Army placed an order for 1,400 of this tank and the first tank, mass produced, was delivered by Krauss Moffei in Munich.

The crew of the tank is four and L7A 1 105mm gun made in Britain is used as its main gun which is common to tanks of the NATO forces and has the same destroying power as that of the British Centurion, U.S.A. M60 and Swiss Pz 61. Its shooting sight is based on a range finder system and it can shoot a target at a distance of 1,000 meters even at night by simultaneous use of infrared rays. Its engine is a water-cooled, 10 cylinder multi-fuel engine by Mercedes Benz.

The maximum high speed is 65km/h. Not only diesel oil but also gasoline and fuel for jet engines can be used. Its chassis and body is water-tight so that it can cross rivers at a depth of 4 meters underwater. Thus, this tank is a modern excellent maneuverability tank of which importance is attached.

Tamiya Military 1/35 U.S.TANK M41 WALKER BULLDOG 35055


Specifications
Scale: 1:35
Material Plastic

About the U.S.TANK M41 WALKER BULLDOG
The M-41 type tank was greatly improved since its first model appeared in the Korean War and because of its light weight and compactness in size, this type tanks were placed mainly with the mechanized cavalry regiment of the U.S. Mechanized Division, as light tanks available for air transportation.

Monday, December 13, 2010

Tamiya Military 1/35 Russian Tank Destroyer SU122 25111


Specifications
Scale: 1:35
Material Plastic

About the LEOPARD A4 West German Tank
When confronted by the Sturmgeschutz II, during the German Blitzkrieg on the Eastern Front, the Russian military quickly began to design their own assault guns. The result was a tank destroyer based on the T-34 chassis, which was armed with a 122mm howitzer. The vehicle was named the SU-122 with the letters "SU" standing for self-propelled and the number "122" representing the 122mm howitzer. Assault guns had some advantages over tanks during the war. Due to lack of a turret, the vehicle could be built with larger more powerful weapons with lower production costs. However, the main disadvantage was the entire vehicle had to be moved to aim at a target. The SU-122 was produced from December 1942 until the summer of 1944. Only 1,150 SU-122 tank destroyers were built during this time. In July 1943, the vehicle was used for the first time in the battle of Kursk. This vehicle set the foundation for the SU-85 and SU-100 tank destroyers.

Features
1/35 scale limited edition plastic assembly model kit of the Russian Tank Destroyer SU-122 .

Includes a Weathering Master Set which features Red Earth, Soot, and Sand colors for Russian tanks, to allow you to apply a realistic finish to your model.

This set includes 7 figures.

Length: 207mm.

The welded marks and realistic cast metal texture on gun mount have been realistically reproduced.

The driver`s hatch and fighting compartment hatch can be assembled in either open or closed positions.

The gun can be depressed and elevated after assembly.

Separate parts to depict the stays for spare fuel tanks are included, adding greater realism to the model. You can display your model without the fuel tanks loaded onto the hull.

Tamiya Motorcycle 1/12 DUCATI DESMOSEDICI 14101


Specifications
Scale: 1:12
Material Plastic

About the DUCATI DESMOSEDICI
Desmosedici is a compound word made from the Italian for sixteen, "sedici" and the name of Ducati`s trademark desmodromic valve design. The DOHC 16 V4 engine is composed of two 90 degree L twin components held together in a tubular steel truss-frame, with swing arm and rear shock pivots directly attached to engine in a truly original fashion. The sleek and powerful bike was piloted in its debut 2003 MotoGP season by L. Capirossi, former 125 and 250cc class title holder, and World Superbike Champion T. Bayliss. The GP4 really showed its stuff during its 2003 debut season, taking 3rd place at Suzuka and winning 1st at Catalunya. Maintaining the same basic structure in 2004, Ducati brushed up everything from the engine to the body to make an even higher performance superbike. While the Desmosedici GP4 had a difficult first half of the season, it began to show results towards the end, with L. Capirossi winning 3rd place in round 15. T. Bayliss also took 3rd in the final round, ending Ducati`s season on a high-note, and promising further excitement still to come!

Build either Capirossi or Bayliss`s bike
High quality Cartograf decals for Capirossi`s No.65 bike and Bayliss`s No.12 bike are included. Separate parts allow accurate depiction of each rider`s custom seat, further enhancing realism.


Features
Detailed 1/12 assembly model kit of the 2004 Ducati Desmosedici
Model accurately depicts trademark Ducati style, such as truss-frame and V4 engine with rear suspension swing arm directly attached to crank case.

Accelerator, clutch and brake wiring masterfully depicted with plastic tubing.

Synthetic rubber tires look and feel like authentic racing slick tires

Side and seat cowling can be removed after assembly allowing full display of engine

Due to sponsor`s request, white marking decals are not included with this kit.



Latest Ducati News!
Ducati Wins at MOTO GP 2005 Japan Grand Prix! Italian rider Loris Capirossi took victory for Ducati, and his first personal win this season, at the Japan Grand Prix held in Motegi on September 18th. After capturing the pole position on the first day, Capirossi swept to victory on the second day, as well as laying down a new Motegi track record on his third lap. Pictures at left: Capirossi and the Ducati pit crew examine Tamiya`s 1/12 scale Ducati Desmosedici.

Tamiya Automotive 1/20 Ferrari F60 Sport Car 20059


Specifications
Scale: 1:20
Material Plastic

About the Ferrari F60 Sport Car
It has been six years since Tamiya has released a all new 1/20 scale F1 model. New for 2009, Tamiya brings F1 modeling to a new level of detail with the Ferrari F60 F1 car. The 2009 F1 world championship challenger was dubbed the F60 due to Ferrari celebrating 60 year of competition. The new F1 Ferrari debuted at the Australian Grand Prix. The F60 started off the season slow, but has gone on to win first place at Round 4 and scored points in every race since. The F60 has taken three 3rd place finishes, one 2nd place finish and a 1st place win at the Belgian Grand Prix. After 12 races, Ferrari holds the third position in the Constructors standings.


Features
1/20 assembly kit of the Ferrari F60.

Length: 246mm, Width: 92mm.

The body cowlings are removable allowing you to view the highly detailed engine and internal mechanisms.

Markings included.

Synthetic rubber tires included.

Metal transfers are included to depict the side mirrors.

Photo-etched parts to depict seatbelt buckles as well as a tire stencil for applying tire markings are included.

Stainless steel antenna included.

Paint your model with Item 85085 TS-85 F60 Ferrari Red.

Sunday, December 12, 2010

Tamiya Automotive 1/24 ENZO Ferrari Sport Car 24302


Specifications
Scale: 1:24
Material Plastic

About the ENZO Ferrari Sport Car
Following the recent release of the Ferrari FXX, Tamiya`s entire line of high-quality 1/24 scale Ferrari models now come in the new elegant black packaging that perfectly compliments these stylish super cars.

Tamiya Automotive 1/24 LAMBORGHINI LP500S Model 24306


Specifications
Scale: 1:24
Material Plastic

About the LAMBORGHINI LP500S
Following on the heels of the recently announced ITEM 24305 Lamborghini Countach LP400 isthe LP500S version.

Styled by Marcello Gandini of the Bertone design studio, the Lamborghini Countach is one of the most widely-recognized super cars in the world. It`s low wedge-shaped body styling inspired the design of many super cars after it and its trademark upward-tilting door design is still quite popular today. The first production Countachs were equipped with a mid-mounted longitudinalV12 engine with 4 liter displacement, hence the LP400 designation. Not satisfied with the stock engine, Canadian industrial magnate Walter Wolf had a Countach customized to his specifications with a more powerful 5 liter V12 engine.

Features
1/24 scale assembly model kit of the Lamborghini Countach LP500S

Futuristic wedge-shaped body accurately reproduced complete with rear wing and widened fenders.

Engine hood can be opened to reveal engine bay.

Headlights that can be modeled in either up or down positions.

Synthetic rubber tires feature realistic tread pattern.

Tamiya Automotive 1/24 MORRIS Mini Cooper Rally 24130


Specifications
Scale: 1:24
Material Plastic

About the Morris Mini Cooper Racing
The Morris Mini was introduced in October 1959 and was a departure from automotive designs of that era. By using a 2-box styling, they produced a four seat compact car about 3 meters in length that used a front engine, front wheel drive layout to keep the passenger compartment flat. It initially had an 848cc, 34hp engine, which allowed a speed of 115km/h


This outstanding design allowed 80% of the overall car length for driver and passenger space, which provided room for four large adults to be seated comfortably. Its patented "Hydrolastic" four wheel independent suspension system was another of its excellent innovations. This superbly balanced car also performed well on racing circuits, and John Cooper of British racing fame, souped-up the engine and introduced it to the public as the Morris Mini Cooper. A series of modification began in 1961 using a 997cc, 55hp engine followed by a 1071cc, 67.5hp version and in 1963 the popular 1275cc, 75hp car came out. The competition version was known as the "Works Mini" and used a 1293cc powerplant, which filled the 1300cc class requirement, and put out 91hp.

The racing Mini proved its potential by dominating races held in 1964 & 65. It won the 1967, 1300cc class title in the British Saloon Car Championships (BSCC), the 1968 European Touring Car Challenge, and again clinched the BSCC title that same year. With its many track and rally successes, the Mini Cooper is a true motorsports gem.

Tamiya Automotive 1/24 MORRIS Mini Cooper 1275S 24039


Specifications
Scale: 1:24
Material Plastic

About the Morris Mini Cooper 1275S Mk.1
Many people who visited the London Motor Show in October 1959 met an unfamiliar sight at the stand of Austin and Morris of the British Motor Company. It had a strange styling which was quite different from the current cars at that time; however most thought it was cute. They could not quite believe that this car could seat comfortably, four large British gentlemen or stout women, in a car that had a length of 3.05m and a width of 1.41m. If they had known the amount of time and trouble that the designers had taken to accomplish this feat, they would have better understood why this was not only practical, but feasible as well.


Prior to the release of the Austin seven and the Morris Mini Minor, the Austin A40, designed by Pininfarina of Italy had been successful in using the 2 box styling. This same design styling was adopted for the Mini Cooper. A front wheel drive was selected to keep the floor paneling level flat. A small powerful engine was selected and developed to be mounted sideways, in front, and driving the small diameter 10" wheels, which were laid out at the four corners of the body.

By this design, 80% of the overall length could be utilized for the passengers and driver, and to further increase the space, the gearbox was installed in the oil sump of the engine. The suspension system of the Mini was one of its most excellent features. Four wheel independent suspension using a double wishbone and a rear trailing arm and the springing was a rubber, semipneumatic, liquid filled and the front and rear wheels were joined together with a thin pipe to equalize the pressures during running. This type of dampening, using hydraulic springing is very compact, so that it could all be mounted without interfering with the passenger compartment. It was patented under the name of "Hydrolastic". The designer of this vehicle was sir Alec Issigonis, a Greek who became a naturalized British subject, and well known throughout the British automobile industry.

Tamiya Automotive 1/24 Porsche 911 Turbo 88 Model 24279


Specifications
Scale: 1:24
Material Plastic

About the Porsche 911 Turbo
Tamiya proudly releases the Porsche 911 Turbo, further expanding our line of Porsche 911 series of models. Famed as the culmination of the 911 series, the Turbo`s impressive design and performance made it the most well known member of the 911 series.

The 911 Turbo debuted in 1975 as Porsche`s first street model to feature a turbo engine. The air-cooled, horizontally opposed 6-cylinder engine featured a KKK turbocharger, 3 liter displacement and 260 hp output. Models built after 1978 featured upgraded engine displacement and output of 3.3 liters and 300 hp respectively. The 911 Turbo`s distinctive style, with its large-size rear wing and front and rear overfenders, coupled with its reliable performance grabbed the attention of car enthusiasts around the world.



Features
1/24 scale assembly kit of the 1988 Porsche 911 Turbo.

Highly detailed static display model faithfully recreates Turbo`s impressive style, including front and rear overfenders and large-size rear wing.

Model features all-new body design to accommodate Turbo`s extra wide tires.

Underside of model features realistic engine detailing with separately molded exhaust pipe.

Synthetic rubber tires feature realistic tread pattern.

Metal transfers used for mirrors and logo.

Tamiya Automotive 1/24 Ferrari 360 Modena Model 24298


Specifications
Scale: 1:24
Material Plastic

About the Ferrari 360 Modena
Following the recent release of the Ferrari FXX, Tamiya`s entire line of high-quality 1/24 scale Ferrari models now come in the new elegant black packaging that perfectly compliments these stylish super cars.

Tamiya Automotive 1/24 NISSAN SKYLINE V-spec R34 24210


Specifications
Scale: 1:24
Material Plastic

About the NISSAN SKYLINE V-spec R34
From 1969 through the early 1970`s, at the Japanese Touring Car Race, the Skyline GT-R achieved an unbelievable streak of fifty victories in a row. Sixteen years later, its successful name was passed on to the R32 type, which was developed as a base machine for Group-A races. To take full advantage of its powerful 2.6l, 6-cylinder, twin turbo engine, it was equipped with a 4-WD system, which provided unrivaled race performance. 1995 saw the larger body and refined mechanics of the R33.


In 1999, the technology cultivated over a long racing history was unsparingly poured into the new R34 type, developed with "ultimate driving pleasure" in mind. The R34 features a smaller body and a sturdier structure, with ample consideration given to its aerodynamics. The adjustable two-level rear spoiler as well as a front and rear diffuser (V-spec), regulate the flow of air under the chassis, heightening control. The R34`s impressive speed is accounted for by a modification in valve timing and turbo-charging of the GETRAG 6-speed transmission controlled engine.

Further refinements have been adopted such as an electronically controlled front/rear power distribution 4WD system and a multi-link suspension. Undergoing extensive testing in Japan, its driving performance was further improved in Germany, on the Nurburgring. Unrivaled speed and control have made the R34 version of the GT-R Nissan`s, if not Japan`s, new index of quality.