skip to main |
skip to sidebar
Motor Specifications
Model: XERUN 4168SD KV2250 Sensored Brushless Motor
Rotational Speed: 2250 KV
Motor Dimensions (Diameter x Length): 40.8mm x 68.4mm
Shaft Dimensions (Diameter x Length): 5mm x 18.5mm
Input Battery Types: NiCd/ Nimh/ Li-po Battery
Recommend Model: RC Model 1/8 Car
Motor Features
- High efficiency (>90%)
- New design with lighter weight but bigger torque
- Higher power than the competition, faster acceleration and highter top speed
- NMB precision ball bearings ensure longer life
- Neodymium agnets ensure high power output
ESC Specification
Model: XERUN-150A
Dimension: 58mm(L) x 46.5mm(W) x 35mm(H)
Cont. / Burst Current: 150A / 950A
Resistance: 0.0002 ohm
Suitable Motor: Sensored and sensorless brushless motors
=>4.5T, KV<=3000 (Works with 4S Li-Po), =>6T, KV<=2400 (Works with 6S Li-Po)
Battery: 6-18 cells NiMH or 2-6 cells Li-Po
BEC Output: 5.75V/3A Switch mode built-in BEC
Cooling Fan Working Voltage: 5V, max. 8V (The fan gets the power supply from the built-in BEC)
Suitable Model: 1/5, 1/8 on-road, off-road, monster, Super powerful applications
ESC Features
Compatible with all sensorless brushless motors and most of sensored brushless motors such as LRP, SpeedPassion, Novak, Etc.
Seamlessly change to sensorless working mode when the sensor cable is broken.
Excellent start-up, acceleration and linearity features.
Built-in switch mode BEC has a powerful output to supply all the electronic equipments.
Firmware can be updated through an USB adapter on the advanced LCD Program Box (Optional equipment).
User programmable. Easily programmed with the "SET" button on the ESC and also compatible with the digital LEDs Program Card and the advanced professional LCD Program Box.
3 running modes (Forward mode, Forward/Reverse mode, Rock Crawler mode).
4 steps of maximum reverse force adjustment.
Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
9 start modes (Also called "Punch") from "very soft (Level 1)" to "very aggressive (Level 9)".
8 steps of timing adjustment to suitable for all brushless motors.
Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
Splash proof and dustproof.
Program Card Specifications
Dimensions 90mm x 51mm x 17mm
Power Supply DC 4.5V to 6.0V
Suitable ESC HOBBYWING / TEKMODEL
Program Card Features and Functions
The 2 IN 1 PROFESSIONAL PROGRAM BOX is a small device to set the programmable parameters of the brushless ESC, it works in the following 2 ways:
1. Working as an individual device to set the ESC, the value of each parameter is displayed on its own LCD screen.
2. Working as an USD adapter to link the ESC with a PC, and the user can update the firmware of the ESC or set the ESC by the special application software on PC.
Program Card Programmable Items
The programmable item for the CAR ESC are:
1. Running Mode
2. Drag Brake Force
3. Low Voltage Cut-Off Threshold
4. Start Mode
5. Maximum Brake Force
6. Maximum Reverse Force
7. Initial Brake Force
8. Throttle Neutral Range
9. Timing
10. Over-Heat Protection
11. Motor Rotation
12. Lipo Cells
Motor Specifications
Motor Model: XERUN 8.5T Sensored Brushless Motor
Rotational Speed: 4000 KV
Motor Dimensions (Diameter x Length): 36mm x 53mm
Shaft Dimensions (Diameter x Length): 3.14mm x 14.5mm
Input Battery Types: NiCd/ Nimh/ Li-po Battery
Recommend Model: RC Model 1/10 Scale Touring Car
ESC Specification
Model: JUSTOCK CLUB SPEC
Dimension: 33mm(L) x 28mm(W) x 31.5mm(H) (Cooling Fan Included)
Cont. / Burst Current: 45A / 260A
Resistance: 0.0006 ohm
Suitable Motor: Sensored and sensorless brushless motors
=>13.5T (1/10 on-road), =>17.5T(1/10 off-road) (Works with 8-9 NiMH or 3S Li-Po),
=>8.5T (1/10 on-road), =>11.5T(1/10 off-road) (Works with 4-6 NiMH or 2S Li-Po),
Battery: 4-9 cells NiMH or 2-3 cells Li-Po
BEC Output: 6V/2A Built-in BEC (Switching mode DC-DC regulator)
Cooling Fan Working Voltage:
5V / 0.16A (The fan gets the power supply directly from the built-in BEC)
Suitable Model: 1/10, 1/12 on-road and off -road, CLUB competition and normal training
ESC Features
Smart and small.
Drivers sensored and sensorless motors.
The most advanced competition firmware with perfect control feeling.
Timing is permanently set to zero degree (unchangeable). With the identical racing motor, each driver has the same power system to have a real just stock racing.
User programmable.
3 running modes (Forward mode, Forward/Reverse mode, Rock Crawler mode).
4 steps of maximum reverse force adjustment.
Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
9 start modes (Also called "Punch") from "very soft (Level 1)" to "very aggressive (Level 9)".
8 steps of timing adjustment to suitable for all brushless motors.
Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
Firmware updatable, but always with zero timing.
Budget friendly. The cheap price makes a CLUB racing more popular and easier.
Program Card Specifications
Dimensions 90mm x 51mm x 17mm
Power Supply DC 4.5V to 6.0V
Suitable ESC HOBBYWING / TEKMODEL
Program Card Features and Functions
The 2 IN 1 PROFESSIONAL PROGRAM BOX is a small device to set the programmable parameters of the brushless ESC, it works in the following 2 ways:
1. Working as an individual device to set the ESC, the value of each parameter is displayed on its own LCD screen.
2. Working as an USD adapter to link the ESC with a PC, and the user can update the firmware of the ESC or set the ESC by the special application software on PC.
Program Card Programmable Items
The programmable item for the CAR ESC are:
1. Running Mode
2. Drag Brake Force
3. Low Voltage Cut-Off Threshold
4. Start Mode
5. Maximum Brake Force
6. Maximum Reverse Force
7. Initial Brake Force
8. Throttle Neutral Range
9. Timing
10. Over-Heat Protection
11. Motor Rotation
12. Lipo Cells
The programmable item for the AIRCRAFT AND HELICOPTER ESC are:
1. Brake Setting
2. Battery Type
3. Low Voltage Protection Mode
4. Low Voltage Protection Threshold
5. Start Mode
6. Timing
7. Governor Mode
8. Motor Type
9. PWM Frequency
10. Built-In BEC Output
11. Motor Load
12. Lipo Cells
Motor Specifications
Motor Model: XERUN 8.5T Sensored Brushless Motor
Rotational Speed: 4000 KV
Motor Dimensions (Diameter x Length): 36mm x 53mm
Shaft Dimensions (Diameter x Length): 3.14mm x 14.5mm
Input Battery Types: NiCd/ Nimh/ Li-po Battery
Recommend Model: RC Model 1/10 Scale Touring Car
ESC Specification
Model: XTREME STOCK ESC
Dimension: 33mm(L) x 28mm(W) x 31.5mm(H) (Cooling Fan Included)
Cont. / Burst Current: 60A / 380A
Resistance: 0.0006 ohm
Suitable Motor: Sensored and Sensorless Brushless Motors
=>13.5T (1/10 on-road), =>17.5T(1/10 off-road) (Works with 8-9 NiMH or 3S Li-Po),
=>8.5T (1/10 on-road), =>11.5T(1/10 off-road) (Works with 4-6 NiMH or 2S Li-Po),
Battery: 4-9 cells NiMH or 2-3 cells Li-Po
BEC Output: 6V/2A Built-in BEC (Linear mode DC-DC regulator)
Cooling Fan Working Voltage:
5V / 0.16A (The fan gets the power supply directly from the built-in BEC)
Suitable Model: 1/10, 1/12 on-road and off -road cars for all STOCK racings
Weight: 46g (Neither cooling fan nor wires includes)
ESC Features
Smart and small with metal shell.
Drivers sensored and sensorless brushless motors.
Factory pre-installed supercharged STOCK competition firmware with Boost Timing and Turbo Timing function.
Firmware updatable. Zero timing firmware is optional to be compliant with ROAR SPORTMAN rules.
Compatible with all firmwares of XERUN-120A-SD and XERUN-60A-SD ESC.
User programmable. Plenty of programmable items make the ESC be suitable for each racing.
Easily programmed with the "SET" button on the ESC, and also compatible with the digital LED Program Card and the advanced professional LCD Program Box.
Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
Splash proof and dust proof.
Program Card Specifications
Dimensions 90mm x 51mm x 17mm
Power Supply DC 4.5V to 6.0V
Suitable ESC HOBBYWING / TEKMODEL
Program Card Features and Functions
The 2 IN 1 PROFESSIONAL PROGRAM BOX is a small device to set the programmable parameters of the brushless ESC, it works in the following 2 ways:
1. Working as an individual device to set the ESC, the value of each parameter is displayed on its own LCD screen.
2. Working as an USD adapter to link the ESC with a PC, and the user can update the firmware of the ESC or set the ESC by the special application software on PC.
Program Card Programmable Items
The programmable item for the CAR ESC are:
1. Running Mode
2. Drag Brake Force
3. Low Voltage Cut-Off Threshold
4. Start Mode
5. Maximum Brake Force
6. Maximum Reverse Force
7. Initial Brake Force
8. Throttle Neutral Range
9. Timing
10. Over-Heat Protection
11. Motor Rotation
12. Lipo Cells
The programmable item for the AIRCRAFT AND HELICOPTER ESC are:
1. Brake Setting
2. Battery Type
3. Low Voltage Protection Mode
4. Low Voltage Protection Threshold
5. Start Mode
6. Timing
7. Governor Mode
8. Motor Type
9. PWM Frequency
10. Built-In BEC Output
11. Motor Load
12. Lipo Cells
Specifications
Operating Voltage Range: DC 10 - 18V
Circuit Power: Max. 80W for charging, Max. 5W for discharging
Charge Current Range: 0.1 - 7.0A
Discharge Current Range: 0.1 - 1.0A
Current drain for balancing Li-po: 300mAh/cell
NiCd/NiMH battery cell count: 1 - 15 Cells
Lithium Battery Cell Count: 1 - 6 Series
Pb Battery Voltage: 2 to 20V
Dimensions: 135mm x 100mm x 40mm
Packet Includes: Multifuctional Connector
Features
Optimized operating software
When charging or discharging, It has an `AUTO` function that sets the feeding current automatically. Especially for Lithium batteries, it can prevent the over-charging can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communication for every possible error so it introduces a maximum safety. These can be set at users option.
Special recharge plugsport for receiver, transmitter and igniter charger. And for frequently used charger port such as multi purpose crocodile pin etc.
It provides most convenient balance charge port for Lithium batteries, with separated 3,4,5,6 charge port, and external reverse connector.
High-power and high-performance circuit
It employs the circuit that has maximum output power of 80W. As a result it can charge or discharge up to 15 cells of NiCd/NiMH and 6 series of Lithium batteries with maximum current of 7.0A. Furthermore the cooling system is so efficient that can hold such a power without any trouble of running the CUP or the operating program.
Individual voltage balancer for Lithium batteries inside
It has an individual-cell-voltage balancer inside. This does not require any extra balancer separately when charging Lithium batteries (Lilo/LiPO/LiFe) for cell voltage balancing.
Balance individual cells on discharge
It also can monitor and balance individual cells of the Lithium battery pack during the discharge process. If the voltage of any one cell varies abnormally, the process will be stopped with the error message.
Accept various types of Lithium battery
It can accept three types of Lithium batteries - Lilo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job. For their specifications, refer `Warnings and safety notes` section.
Lithium battery `Fast` and `Storage` mode
You can charge Lithium battery for special purposes. `Fast` charge reduces the charging time of Lithium battery and `storage` mode controls the final voltage of the battery to be suit for long time storage.
Maximum safety
Delta-peak sensitivity: The automatic charge termination program works on the principle of the Delta-peak voltage detection. (NiCd/NiMH)
Auto-charge current limit: When charging NiCd or NiMH at `AUTO` current mode, you can set the upper limit of change current to avoid from high current charging. This is very useful when charging the low impedance and small capacity NiMH battery in `AUTO` mode.
Capacity limit: The changing capacity always calculated by multiple of the charging current and time. If the charging capacity exceeds the limit the process will be terminated automatically when you set the maximum value.
Processing time limit: you can also restrain the maximum process time to prevent form any possible defect.
Input power monitor: To protect the car battery using as input power from being damaged the voltage of it always monitored. If it drops below the lower limit the process will be ended automatically.
Automatic cooling fan: The electric cooling fan comes into action automatically only when the internal temperature of the unit is raised.
Data store / load
For users convenience it can store maximum 5 data of different batteries. You can establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.
Cyclic charging / discharging
Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.
Introduction
KDS900 is designed specially for RC helicopter. It is a high quality and precision gyro. The gyro adopts AVCS, high performance SMM sensor and controller. It features excellent location capiblity, and stable yaw rate which can avoid influence from external variables, such as rotation speed of rotor head on helicopter, flight speed and crosswind. With these advantages, you can greatly enjoy your flight with KDS900 gyro.
The performance of gyro is closely related to servos. The quicker the respone of servos, the better the sensitivity and performance of gyro. It is recommended to use Futaba S9253, S9254, S9257, S9256 or BLS251 to match KDS900 gyro.
AVCS Gyro
Conventional gyros send control signals to the rudder only when the tail of the helicopter moves. When the tail stops moving, the control signal from the gyro becomes zero. Conversely, the AVCS gyro continues to send control signals to the servo even when the tail of the helicopter stops moving. The following sequentially describes the conventional gyro and the AVCS gyro.
Operation of Conventional Gyro
Basic operation is described by considering the case when the helicopter is hovering under crosswind conditions. With a conventional gyro, when the helicopter encounters a crosswind, the force of the crosswind causes the tail of the helicopter to drift. When the tail stops drifting, the control signal from the gyro becomes zero. If the crosswind continues to cause the tail to drift in this state, the ‘stop’ operation is repeated until the tail faces downwind. This is called the ‘weathervane’ effect.
Operation of AVCS Gyro
Conversely, with an AVCS gyro, when the helicopter encounters a cross-wind and the tail drifts, a control signal from the gyro stops the drift. At the same time, the gyro computes the drift angle and constantly outputs a control signal that resists the crosswind. Therefore, drifting of the tail can be stopped even if the crosswind continues to effect the helicopter. In other words, the gyro itself automatically corrects (auto trim) changes in helicopter tail trim by crosswind. Considering operation of an AVCS gyro, when the tail of the helicopter rotates, the servo also rotates in accordance with the angle of rotation of the tail. When the tail stops rotating, the servo judges that it has stopped in that position. This the auto trim function.
Features
AVCS System
since rudder drifting caused by wind, or other meteorological factors and different helicopter attitudes will by eliminated automatically, the perfect to tail (rudder) will become more easier, making it operation to 3D Flight.
SMM Gyro Sensor
Use of newly developed extremely low drift SMM (Silicon Micro Machine) gyro sensor virtually eliminates rudder trim changes during flight.
Support Boardband and Narrowband Digital Servo
You can configure 1520uS servos and 760uS servos via setup card.
Remote Gain Function and Mode Switching Function
Remote gain function allows sensitivity switching from transmitter and mode switching function allows AVCS / normal gyro mode switching.
Integrated, Compact and Lightweight
Compact size (23 x 23 x 10mm) and light weight (9g) realized by high density mounting technology.
Gyro Specifications
Control System: Digital Proportional Integration
Sensor: ADI SMM high functions angular velocity sensor
Working Voltage: 4 – 6V DC
Working Current: <55ma>
Motor Specifications
Motor Model: HOBBYWING 6000KV EZRUN 5.5T VICTORY
Rotational Speed: 6000 KV
Motor Dimensions (Diameter x Length): 36mm x 52.5mm
Shaft Dimensions (Diameter x Length): 3.14mm x 14mm
Input Battery Types: NiCd/ Nimh/ Li-po Battery
Recommend Model: RC Model Car
ESC Specifications
ESC Model: EZRUN-60A-SL
Dimensions: 31.5mm x 27.5mm x 24mm (The height of fan is not included)
Net Weight: 32g (without wires)
Continuous Current: 60A
Burst Current: 380A
Resistance: 0.0007 ohm
BEC Output: 6V/1.5A
Suitable Brushless Motor:
On-road: =>5.5T, Off-road: =>8.5T (2 cells Lipo / 6 cells NiMH)
On-road: =>8.5T, Off-road: =>13T (3 cells Lipo / 9 cells NiMH)
Working Battery Types: 4 - 9 Cells (NiMh) / 2 - 3 Cells (Li-Po)
Motor Type: Sensorless Brushless Motor
User Programmable: Available
Cable Type: 14 AWG (Battery and Motor)
Cable Length: 100mm (Motor), 150mm (Battery), 220mm (Receiver)
Recommend Model: RC Model 1/10 Car
ESC Features
Specially designed for RC car and truck, with excellent start-up, acceleration and linearity festures.
Compatible with sensorless brushless motor.
3 running modes suitable for different applications ("Forward with brake" mode, "Forward/Backward with brake" mode and "Rock crawier" mode).
4 steps of maximum reverse force adjustment.
Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
9 start modes ("Punch") from "Soft" to "very aggressive" to be suitable for different chassis, tires and tracks.
Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
8 steps of timing adjustment.
User Programmable. Several program methods are supported, such as: The "SET" button on the ESC, the digital LED program card, the advanced LCD program box, the PC software, etc. The program card and program box are pocket-sized and they have friendly user interface to be easily used.
Dustproof
Program Card Specification
Dimension (Length x Width x Height): 88mm x 58mm x 14mm
Program Card Features
- Running Mode
- Drag Brake Force
- Low Voltage Cut-Off Threshold
- Start Mode
- Maximum Brake Force
- Maximum Reverse Force
- Initial Brake Force
- Throttle Neutral Range
- Timing
- Over-Heat Protection
- Motor Rotation
- Lipo Cells
Specifications
Dimensions:
Helicopter Length x Width x Height: 220mm x 130mm x 95mm
Main Rotor Diameter: 186mm
Tail Rotor Diameter: 32mm
Stabilizer Length: 108mm
Battery Type: 180mAh 3.7V Lithium Polymer Battery
Transmitter Batteries: 6 x AA Alkaline Batteries
Frequency: Infrared Control System - Bands A, B & C
Control Specification: Steering / Ascend / Descend / Forward / Backward / Left / Right / Light
Auto Charging Time: 20 - 30 minutes
Flight Duration: 6 - 7 minutes
Remote Control Distance: About 10m
Net Weight: 44.5g
Specifications
Dimensions:
Helicopter Length x Width x Height: 220mm x 130mm x 95mm
Main Rotor Diameter: 186mm
Tail Rotor Diameter: 32mm
Stabilizer Length: 108mm
Battery Type: 180mAh 3.7V Lithium Polymer Battery
Transmitter Batteries: 6 x AA Alkaline Batteries
Frequency: Infrared Control System - Bands A, B & C
Control Specification: Steering / Ascend / Descend / Forward / Backward / Left / Right / Light
Auto Charging Time: 20 - 30 minutes
Flight Duration: 6 - 7 minutes
Remote Control Distance: About 10m
Net Weight: 44.5g
Motor Specifications
Motor Model: HOBBYWING EZRUN 3500KV 10T
Rotational Speed: 3500 KV
Motor Dimensions (Diameter x Length): 35.8mm x 55mm
Shaft Dimensions (Diameter x Length): 3.17mm x 15mm
Input Battery Types: NiCd/ Nimh/ Li-po Battery
Recommend Model: RC Model Car / Truggy / Buggy / Monster
ESC Specification
Model: EZRUN-SC10
Dimension: 53.5mm(L) x 36mm(W) x 36mm(H)
Cont. / Burst Current: 70A / 520A
Resistance: 0.0007 ohm
Suitable Car: 1:10 Truggy / Buggy / Monster
Suitable Motor: Sensorless Brushless Motors
Suitable Motor Turns: 2S Lipo: =>6T, KV<=6000 / 3S Lipo: =>9T, KV<=4000
Battery: 6-9 cells (NiMH or NiCd) or 2-3 cells (Li-Po)
BEC Output: 6V/3A (Linear mode built-in BEC)
Net Weight: 88g
ESC Features
Integrated and compact design, very suitable for trucks (especially short course trucks) and buggies.
The built-in switching mode BEC of EZRUN-SC8 ESC has a powerful output to supply all electronic equipments even with 4S Lipo Input.
The major electronic components are sealed against splashing water and dust.
2 mounting holes on the bottom are helpful for firmly installing the ESC at the chassis.
Excellent start-up, acceleration and linearity features.
Proportional ABS brake function with 5 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment. Also compatible with the mechanical disc-brake system.
Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
Easily program with only one button and compatible with Pocket-sized Program Card (Optional Equipment) and the advanced LCD Program Box (Optional Equipment)
Program Card Specification
Dimension (Length x Width x Height): 88mm x 58mm x 14mm
Program Card Features
- Running Mode
- Drag Brake Force
- Low Voltage Cut-Off Threshold
- Start Mode
- Maximum Brake Force
- Maximum Reverse Force
- Initial Brake Force
- Throttle Neutral Range
- Timing
- Over-Heat Protection
- Motor Rotation
- Lipo Cells
Motor Specifications
Motor Model: HOBBYWING EZRUN 2700KV
Rotational Speed: 2700 KV
Motor Dimensions (Diameter x Length): 40mm x 65mm
Shaft Dimensions (Diameter x Length): 3.17mm x 15mm
Input Battery Types: NiCd/ Nimh/ Li-po Battery
Recommend Model: RC Model Car / Truggy / Buggy / Monster
Net Weight: 329g
ESC Specification
Model: EZRUN-SC8
Dimension: 53.5mm(L) x 36mm(W) x 36mm(H)
Cont. / Burst Current: 120A / 760A
Resistance: 0.0004 ohm
Suitable Car: 1:8 Truggy / Buggy (Includes TRAXXAS 1/10 Truggy and Buggy)
Suitable Motor: Sensorless Brushless Motors
Suitable Motor Turns:
2S Lipo: =>6T, KV<=6000 / 3S Lipo: =>9T, KV<=4000 / 4S Lipo: KV<=3000
Battery: 6-12 cells (NiMH or NiCd) or 2-4 cells (Li-Po)
BEC Output: 6V/3A (Switching mode built-in BEC)
Net Weight: 98g
ESC Features
Integrated and compact design, very suitable for trucks (especially short course trucks) and buggies.
The built-in switching mode BEC of EZRUN-SC8 ESC has a powerful output to supply all electronic equipments even with 4S Lipo Input.
The major electronic components are sealed against splashing water and dust.
2 mounting holes on the bottom are helpful for firmly installing the ESC at the chassis.
Excellent start-up, acceleration and linearity features.
Proportional ABS brake function with 5 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment. Also compatible with the mechanical disc-brake system.
Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
Easily program with only one button and compatible with Pocket-sized Program Card (Optional Equipment) and the advanced LCD Program Box (Optional Equipment)
Program Card Specification
Dimension (Length x Width x Height): 88mm x 58mm x 14mm
Program Card Features
- Running Mode
- Drag Brake Force
- Low Voltage Cut-Off Threshold
- Start Mode
- Maximum Brake Force
- Maximum Reverse Force
- Initial Brake Force
- Throttle Neutral Range
- Timing
- Over-Heat Protection
- Motor Rotation
- Lipo Cells
Posts
