HOBBYWING XERUN Blue V2 Brushless Motor 120A ESC

Specification
Model: XERUN-120A-V2
Dimension: 43mm(L) x 36mm(W) x 33mm(H)
Cont. / Burst Current: 120A / 760A
Resistance: 0.0003 ohm
Suitable Motor: Sensored and sensorless brushless motors
=>3.5T (on-road), =>5.5T(off-road) (Works with 5-6 NiMH or 2S Li-Po),

=>5.5T (on-road), =>8.5T(off-road) (Works with 8-9 NiMH or 3S Li-Po),
Battery: 4-9 cells NiMH or 2-3 cells Li-Po
BEC Output: 5.75V/3A Built-in BEC
Cooling Fan Working Voltage:

5V / 0.16A, max. 8V (The fan gets the power supply directly from the battery)
Suitable Model: 1/10, 1/12 on-road and off -road, 1/8, 1/10 scale rock crawler

Features
Compatible with all sensorless brushless motors and most of sensored brushless motors such as LRP, SpeedPassion, Novak, Etc.

Seamlessly change to sensorless working mode when the sensor cable is broken.

Excellent start-up, acceleration and linearity features.

Built-in switch mode BEC has a powerful output to supply all the electronic equipments.

Firmware can be updated through an USB adapter on the advanced LCD Program Box (Optional equipment).

User programmable. Easily programmed with the "SET" button on the ESC and also compatible with the digital LEDs Program Card and the advanced professional LCD Program Box.

3 running modes (Forward mode, Forward/Reverse mode, Rock Crawler mode).

4 steps of maximum reverse force adjustment.

Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.

9 start modes (Also called "Punch") from "very soft (Level 1)" to "very aggressive (Level 9)".

8 steps of timing adjustment to suitable for all brushless motors.

Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.

Tamiya ROBO 4-Legged Walking Robot with Generator 71122

Introduction
This is an assembly kit of the 4 legged robot that moves by creating electricity buy winding up the hand generator. The motor is run by electricity, but without the need for batteries since all power is created by the supplied hand crank. 4 legged walking mechanism has L-shaped front legs transmit movement to rear legs and walks with eyes and tail moving. Connection between generator unit and walking mechanism is ensured by wire harness with connector. Assembly is easy with snap-on and screw in.



Specifictions & Features
Generator unit has gear (gear ration of 38.2:1), and if winded faster, it will walk faster. Approximately 2.5V (no loading) generation is possible.

L-shaped front legs transmit movement to rear legs and walks smoothly. Long stretched eyes move left to right when its body tilt walking. Spring tail comically moves when by vibration of walking. Connection between generator unit and walking mechanism is ensured by wire harness and connector. Assembly is easy with snap-on and screw in.

When generator handle is turned right, it will move forward, and it will move backward when turned left. Also, when handle is turned slowly, walking speed will be slowed, and vice versa

Because walking speed will be changed by turning generator, it will be fun to race.

SPRINGRC G61 2.4GHz 6ch Transmitter Receiver M2

Introduction
Thank you for interesting SPRINGRC G61 digital proportional radio control system. This product could apply to all kings of electric power, oil powered fixed-wing airplane and general helicopter.









Specifications
Transmitter: TG661
Transmission Frequency: 2.4GHz - 2.483GHz
Control Method: FSK
Control System: PPM
Channel: 6ch
Operating Mode: Mode 2 (Throttle Left Side)
Power: 8 AA Ni-MH / Alkaline Batteries
Current: 200ma


Receiver: SM-RG661
Receiving Frequency: 2.4GHz - 2.483GHz
Control Method: FSK
Control System: PPM
Channel: 6ch
Power: 4.8 - 6V
Current: <200mA
Weight: 6.8g
Dimensions: 34 x 20 x 14mm
Temperature: - 20 to 70 Degree
Receiving Range: 300m

New Arrival!! FS FS-GT3B 3ch 2.4GHz LCD Transmitter & Receiver

Introduction
AFHDS (automatic frequency hopping digital system), is developed by FLYSKY for all the Radio Control model lovers and is patented by FLYSKY at home. The system is specially developed for all the Radio control models, that offers super active and passive anti-jamming capabilities, very low power consumption and high receiver sensitivity. With extreme rigorous testing by engineers and studying the markets for years, FLYSKY AFHDS is now considered to be the one of the best systems available in the market.

Transmitter Specifications
Dimension: 154 x 127 x 270mm
Net Weight: 395g
ANT Length: 26mm (2.4GHz)
Channels: 3ch
Frequency: 2.4GHz
Modulation: GFSK
System Type: AFHDS
Sensitivity: 1024
LCD Dimension: 100mm (L:95 x W:3mm) / 4 inches (L:3`12 x W:1`3 inches)
RF Power: no more than 10mW
Low Voltage Warning: Yes (less than 9.5V)
DSC port: Yes (3.5mm)
Charger Port: Yes
Power: 12V DC (1.5V x 8)
Model Type: RC Car / Boat
Certificate: CE (0678) FCC



Receiver Specifications
Dimension: 37.6 x 22.3 x 13mm
Net Weight: 5g
ANT Length: 26mm
Channels 3ch
Frequency: 2.4GHz
Modulation: GFSK
System Type: AFHDS
Sensitivity: 1024
RF Receiver Sensitivity: -105dbm
Power: 4.5 - 6V DC (1.5V x 4)
Model Type: RC Car / Boat
Certificate: CE (0678) FCC