Tamiya Military 1/35 Kampfpanzer LEOPARD Tank 35064
Available at http://www.rcecho.com/tamiya-military-1-35-kampfpanzer-leopard-tank-35064.html
Available at http://www.rcecho.com/tamiya-military-1-35-kampfpanzer-leopard-tank-35064.html
Scale: 1:35
Material Plastic
About the Kampfpanzer LEOPARD Tank
Defeated in World War II, Imperial Germany completely collapsed and its territory was divided into two spheres, liberalist and communists. Then in 1955, West Germany was admitted to the Western European Alliance and the West German Defense Forces was re-established as a new member of the NATO powers.
As West Germany is adjacent to the communist sphere, problems on national defense was much thought of. To defend the border-line an armoured unit was established. The German techniques by which the Tiger, Panther and other excellent tanks were produced was succeeded by this Leopard tank that appeared in 1961 in West Germany. Leopard also has the name of `Standard Panther`. It was prototyped in 1961 and 1962 and was formally adopted by the West German Army in 1963, prior to the adoption of the French A.M.X. 30. In 1964, the West German Army placed an order for 1,400 of this tank and the first tank, mass produced, was delivered by Krauss Moffei in Munich.
The crew of the tank is four and L7A 1 105mm gun made in Britain is used as its main gun which is common to tanks of the NATO forces and has the same destroying power as that of the British Centurion, U.S.A. M60 and Swiss Pz 61. Its shooting sight is based on a range finder system and it can shoot a target at a distance of 1,000 meters even at night by simultaneous use of infrared rays. Its engine is a water-cooled, 10 cylinder multi-fuel engine by Mercedes Benz.
The maximum high speed is 65km/h. Not only diesel oil but also gasoline and fuel for jet engines can be used. Its chassis and body is water-tight so that it can cross rivers at a depth of 4 meters underwater. Thus, this tank is a modern excellent maneuverability tank of which importance is attached.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/35 German Sd.Kfz.142 Tank Model 35281
Tamiya Military 1/35 German Sd.Kfz.142 Tank Model 35281
Available at http://www.rcecho.com/tamiya-military-1-35-german-sd.kfz.142-tank-model-35281.html
Available at http://www.rcecho.com/tamiya-military-1-35-german-sd.kfz.142-tank-model-35281.html
Scale: 1:35
Material Plastic
About the German Sd.Kfz.142 Tank
After debuting to great acclaim in our 1/48 MM Series, the popular Sturmgesch`tz III (StuG III) Ausf. B now makes its way to the 1/35 MM Series. With its short barreled cannon and squat, formidable hull shape, the 1/35 StuG III promises to offer boxful of modeling satisfaction.
Features
Accurate 1/35 scale model of the German Sturmgesch`tz III Ausf. B assault gun.
Cannon can be raised and lowered after assembly
Includes fully detailed accessories to mount onto fender for full accuracy.
Precision detailing right down to the loading device and wireless radio inside compartment.
Comes with aluminum gun barrel and photo-etched mesh cover for engine air intake.
Employs swing-arm type suspension.
Includes 3 sets of markings and 1 commander figure.
New Arrival! Tamiya Military 1/35 Panzerkampfwagen III Ausf.N 35290
Tamiya Military 1/35 Panzerkampfwagen III Ausf.N 35290
Available at http://www.rcecho.com/tamiya-military-1-35-panzerkampfwagen-iii-ausf.n-35290.html
Available at http://www.rcecho.com/tamiya-military-1-35-panzerkampfwagen-iii-ausf.n-35290.html
Scale: 1:35
Material Plastic
About the Panzerkampfwagen III Ausf.N
The rugged Panzer kampfwagen III was used in all theaters by the German army in WWII and was well-liked due to its reliability. However, the size limitations of the tank`s chassis meant that armament upgrades were limited and its usefulness as a battle tank diminished as the Allies produced more advanced and powerful tanks. With this realization, the final variant of thePz.kpfw.III, the Ausf.N, was modified into an infantry support tank armed with the short-barreled75mm gun from the Pz.kpfw.IV, which was being upgraded with more powerful guns. Beginning from June 1942, 700 of these Ausf.N variants, also known as Sturmpanzer III, were made and were often assigned to independent Panzer Battalions to protect the heavier Tiger tanks. The5mm Schurzen armor skirt modifications were added from the spring of 1943.
High-quality 1/35 scale assembly model kit of the Panzerkampfwagen III Ausf.N.
Detailed short-barreled 75mm main gun includes gun breech and parts for 2 types of mantlet.
Precision-made aluminum parts for main gun barrel.
Turret features accurately reproduced parts for smoke dischargers.
3 types of markings, including one for a tank in North Africa, are included.
One tank crew figure also included and can be depicted with headphones or signal gun.
An excellent piece to display with the previously released Sd.Kfz.222 North African Campaign.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/35 StuG III Ausf.G Finnish Army 35310
Tamiya Military 1/35 StuG III Ausf.G Finnish Army 35310
Available at http://www.rcecho.com/tamiya-military-1-35-stug-iii-ausf.g-finnish-army-35310.html
Available at http://www.rcecho.com/tamiya-military-1-35-stug-iii-ausf.g-finnish-army-35310.html
Scale: 1:35
Material Plastic
Features
1/35 scale plastic assembly model kit.
Length: 189mm, Width: 85mm.
The unique form of the tank destroyer is realistically reproduced.
Distinctive features of Finnish StuG`s such as large concrete armor blocks and logs are also included.
In addition, tools and spare tracks are included for greater realism.
The DT machine gun has a sharp finish.
Commander figure (torso) and four kinds of markings included
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/35 U.S. M20 Armored Utility Car 35234
Tamiya Military 1/35 U.S. M20 Armored Utility Car 35234
Available at http://www.rcecho.com/tamiya-military-1-35-u.s.-m20-armored-utility-car-35234.html
Available at http://www.rcecho.com/tamiya-military-1-35-u.s.-m20-armored-utility-car-35234.html
Scale: 1:35
Material Plastic
About the U.S. M20 Armored Utility Car
A derivative of the U.S. M8 Light Armored Car Greyhound, the U.S. M20 Armored Utility Car rolled onto the battlefield in 1943. The rotating turret of the M8 was removed, allowing space for passenger seats, a commanders table, radio sets and a ring mounted M2 heavy machine gun. The M20 was mainly deployed to the Tank Destroyer Unit, where its top speed of about 90km/h was taken advantage of in command, cargo, and reconnaissance duties.
This plastic assembly model kit is based on the U.S. M20 Armored Utility Car.
The low body with an open-top has been richly recreated in 1/35th scale.
The passenger seats, folding commander`s table, and radio sets all overflow with authenticity.
Kit also features a bazooka, ammunition cartridges, ring mounted M2 heavy machine gun and other detailed accessories.
Two lifelike figures for the commander and driver are also included
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/35 Russian Tank Destroyer SU122 25111
Tamiya Military 1/35 Russian Tank Destroyer SU122 25111
Available at http://www.rcecho.com/tamiya-military-1-35-russian-tank-destroyer-su122-25111.html
Available at http://www.rcecho.com/tamiya-military-1-35-russian-tank-destroyer-su122-25111.html
Scale: 1:35
Material Plastic
About the Russian Tank Destroyer SU122
When confronted by the Sturmgeschutz II, during the German Blitzkrieg on the Eastern Front, the Russian military quickly began to design their own assault guns. The result was a tank destroyer based on the T-34 chassis, which was armed with a 122mm howitzer. The vehicle was named the SU-122 with the letters "SU" standing for self-propelled and the number "122" representing the 122mm howitzer. Assault guns had some advantages over tanks during the war. Due to lack of a turret, the vehicle could be built with larger more powerful weapons with lower production costs. However, the main disadvantage was the entire vehicle had to be moved to aim at a target. The SU-122 was produced from December 1942 until the summer of 1944. Only 1,150 SU-122 tank destroyers were built during this time. In July 1943, the vehicle was used for the first time in the battle of Kursk. This vehicle set the foundation for the SU-85 and SU-100 tank destroyers.
Features
1/35 scale limited edition plastic assembly model kit of the Russian Tank Destroyer SU-122 .
Includes a Weathering Master Set which features Red Earth, Soot, and Sand colors for Russian tanks, to allow you to apply a realistic finish to your model.
This set includes 7 figures.
Length: 207mm.
The welded marks and realistic cast metal texture on gun mount have been realistically reproduced.
The driver`s hatch and fighting compartment hatch can be assembled in either open or closed positions.
The gun can be depressed and elevated after assembly.
Separate parts to depict the stays for spare fuel tanks are included, adding greater realism to the model. You can display your model without the fuel tanks loaded onto the hull.
Because this product is incomplete model,?buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
Remote Controlled Toys Online Shop: www.rcecho.com
We highly recommend the follow RC TOYS model, We accept Wholesale order worldwide, We also sell onEBAY.COMaccept PAYPAL and Credit Card
APC Electric 11 x 7 E RC Composite Propeller USD4.90 only
AXI Gold Line 2217/20 Outrunner Brushless Motor USD69.90 only
FS FS-GT3B 3ch 2.4GHz LCD Transmitter & Receiver USD42.90 only
Futaba FP-R113F FM 41MHz 3ch DSC Micro Receiver USD57.90 only
APC Electric 9 x 3.8 SF RC Composite Propeller USD4.90 only
XERUN 4000KV Sensored Motor & 120A ESC + LCD Card USD159.90 only
AXI Gold Line 4130/20 Outrunner Brushless Motor USD134.90 only
Futaba Extension Cord 1500mm for Servo & Receiver USD9.90 only
Master Airscrew 3-Blade 7 x 4 Nylon Propeller USD8.90 only
APC Model 8 x 7 RC Composite Propeller USD3.90 only
O.S. SPEED 71410250 HEX 2.5mm Wrench Driver Tool USD22.90 only
Esky FM 41.040MHz Receiver and Transmitter Crystal USD3.90 only
Esky FM 72.830MHz Receiver and Transmitter Crystal USD3.90 only
Futaba CR-2500 Li-ion Battery Charger & Discharger USD108.90 only
Tamiya Modeling No.01 Flat Brush 87028 USD3.90 only
RCS Model C5055 700 KV Outrunner Brushless Motor USD43.90 only
APC Model 9.25 x 5.5 RC Composite Propeller USD6.90 only
RC Model 450 Helicopter T450B18 Canopy Body USD7.90 only
APC Model 10 x 9 RC Composite Propeller USD4.90 only
Tamiya RC 0.5 Steel Pinion Gear Set (20T, 21T) 53081 USD8.90 only
Posts
No comments:
Post a Comment