Tamiya WW2 Russian Field Commander 1/16 Figure Z 36314
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:16
Material Plastic
Features
1/16 scale model of a WWII Russian Field Commander.
The model depicts the officer figure holding a PPsh41 sub machine gun.
The officer figure is wearing a field uniform with shoulder lapels and a garrison cap as seen from February 1942.
The PPsh41 sub machine gun, ammunition pouch, map case, and side arm holster have been realistically reproduced.
Separately molded parts to depict the officer`s hands as well as the jacket`s collar and hem have a rich detailed finish.
Medals have a sharp finish and rank insignia decals are also included.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/35 German Panzer Grenadiers Z 35061
Tamiya Military 1/35 German Panzer Grenadiers Z 35061
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:35
Material Plastic
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/35 German 8T Semi Track Sdkfz Z 35050
Tamiya Military 1/35 German 8T Semi Track Sdkfz Z 35050
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:35
Material Plastic
About the German 8T Half Track Sdkfz 7/1
Recognising the excellent tractive force and cross-country ability of half tracks, the German Army Ordnance Bureau decided in 1932 to develop six military half tracks, from a 1-ton to a large 18-ton tractor. Different car makers were ordered to develop one of these.
Krauss-Maffeir in Munich took charge of an 8-ton half tracks. Because this firm had given attention and study to half tracks since 1928, they completed a prototype, named KMm7 as early as 1933. It soon developed into the KMm8 and KMm9, and in 1936 the KMm10 was put into production. It was not until the KMm10 was born that the 8-ton half track was officially designated "Medium 8-ton Tractor (Sd.Kfz-7). The last production model, KMm11 was completed in 1938 and put into production immediately.
The production of the 8-ton half track totalled about 1,200 in number by the end of World War II. One of these models was the 8-ton half track with 20mm four-barrelled AA machine gun (Sd.kfz 7/1).
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/35 German Assault Troops Kit Z 35030
Tamiya Military 1/35 German Assault Troops Kit Z 35030
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:35
Material Plastic
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/25 German Panzer Grenadier Z 89625
Tamiya Military 1/25 German Panzer Grenadier Z 89625
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:25
Material Plastic
About the German Panzer Grenadier
Originally released in the 1974, this kit is sure to be a collector item.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Aircraft 1/48 V-1 (Fieseler Fi103) Model Z 61052
Tamiya Aircraft 1/48 V-1 (Fieseler Fi103) Model Z 61052
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:48
Material Plastic
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Aircraft 1/72 Supermarine Spitfire Mk.1 Z 60748
Tamiya Aircraft 1/72 Supermarine Spitfire Mk.1 Z 60748
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:72
Material Plastic
The Supermarine Spitfire is regarded by many as the most esthetically designed single seat fighter to appear during the Second World War. It was conceived by the brilliant British designer Reginald J. Mitchell, and first flew on 5 March 1936. It was an advanced, low wing single seat monoplane with a very smooth flush riveted metal skin and a long flowing front cowling. Using the famous RollsRoyce "Merlin` liquid cooled 12 cylinder engine that produced more than 1,000 horsepower, the Mk I Spitfire attained a top speed of 586km/h. The very distinctive elliptical shaped wing was useful in reducing parasitic drag and allowed a fairly thin wing construction. It carried a large coolant radiator under the starboard wing, and a small oil cooler under the port wing, giving it an asymmetrical appearance when viewed from the front and bottom. The retractable main landing gear also contributed to its smooth lines, and gave it higher performance. The Mk I Spitfire was armed with eight 7.7mm machine guns, four to each wing. The early production of Mk I Spitfires used a fixed pitch wooden two blade propeller, which was later replaced with a two-pitch wooden two blade propeller. The Spitfire`s combat action in thwarting Germany`s attempt to raid the English mainland during 1940, and known as the "Battle of Britain" has ensured this fighter`s pride of place in the minds of England`s men and women forever.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Aircraft 1/100 MiG-19 Farmer-E Toy Model Z 61609
Tamiya Aircraft 1/100 MiG-19 Farmer-E Toy Model Z 61609
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:100
Material Plastic
The supersonic fighter MiG-19 was unveiled to the world by the former Soviet Union in 1955 at the Tushino air show. She was later also used by Nations of the Warsaw Pact during interception operations. With durable structure and excellent performance, the MiG-19 became the cornerstone for subsequent MiG fighter jets.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Aircraft 1/100 L.T.V. A-7A Corsair II Z 61607
Tamiya Aircraft 1/100 L.T.V. A-7A Corsair II Z 61607
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:100
Material Plastic
The U.S. Navy carrier-based fighter, the Corsair A-7, made its maiden flight in 1965. Two years later, the A-7A, which was stationed on the carrier USS Ranger, engaged in action in the Vietnam War. Other A-7 models produced include the B, C, E, and D, seeing the A-7 continue to serve until the early 1990`s.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Aircraft 1/100 F-4EJ Phantom II Model Z 61605
Tamiya Aircraft 1/100 F-4EJ Phantom II Model Z 61605
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:100
Material Plastic
Japan`s F-4EJ Phantom II was deployed to all 6 JASDF squadrons in the 1970`s. Based on the U.S. Air Force`s F-4E, 140 F-4EJ planes were produced for the JASDF. The F-4EJ featured a 20mm Vulcan canon affixed under the nose, and AIM-7E Sparrow and AIM-9L Sidewinder missiles.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Aircraft 1/100 Messerschmitt Me262A&163B Z 61604
Tamiya Aircraft 1/100 Messerschmitt Me262A&163B Z 61604
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:100
Material Plastic
The jet-engined Me262 and rocket-engined Me163 are regarded as epoch-making aircrafts. Developed by German manufacturer Messerschmitt towards the end of WWII, these high-speed aircraft engaged in interception operations threatening allied B-17 bombers.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/35 US M113A1 Fire Support Kit Z 35107
Tamiya Military 1/35 US M113A1 Fire Support Kit Z 35107
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:35
Material Plastic
About the U.S. M113A1 Fire Support Kit
The M113 has proved to be one of the most popular and versatile of all military tracked vehicles developed since World War II. The M113 is one of the vehicles most widely used in non-Comunist countries of the world and is showing activity as transport for infantrymen of free nations. The M113 because of its comparatively low initial cost has been developed into more than one hundred different variants.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/35 U.S. M2 Bradley IFV Model Z 35132
Tamiya Military 1/35 U.S. M2 Bradley IFV Model Z 35132
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:35
Material Plastic
About the U.S. M2 Bradley IFV
Mechanization of ground forces first came about during the 1st World War with the introduction of an armoured tracked vehicle fielding a large bore cannon, by England. This vehicle was dubbed "Tank" by Winston Churchill, and the innovation has altered the conduct of warfare to this day. During the second conflict, the mechanization of Infantry was perfected by the Germans and brought about the name Blitzkrieg. During that conflict over 3 million military vehicles were produced, and even thought the tank had considerable advantages, the need for a method of having the Infantry keep pace with them became a necessity.
After the war, many countries modified existing armoured personnel carriers for modern usage. The M113, which was first fielded in 1964, was a low budget, trouble free masterpiece and widely used throughout the globe. The United States needed a "fight from within" mechanized Infantry Combat Vehicle and research started in 1967 for a vehicle to meet this purpose. With the greater speed and mobility of the M1 Abrams MBT new requirements were levied that the IFV and CFV must be able to keep up and support the MBT`s. The FMC Corporation of San Jose, Califoria won the bidding competition and the M2/3`s came into being. Dubbed the Bradley in honor of Omar N. Bradley, a five star general of World War 2 fame, the M2/3 series offer the sought after flexibility in a true "fight from within" concept.
The M2 Infantry Fighting Vehicle differs from the M3 in the addition of six external firing ports to handle the M231 FPW`s which can be operated by the six, fully equipped infantrymen carried within. Manned by a crew of three, the M2 IFV mounts a Hughes 25mm M242 chain-gun and a coaxially mounted 7.62 machine gun, housed in an offset turret which can traverse 360 degrees. With a maximum elevation angle of 60 degrees, the cannon provides aircraft and helicopter protection. A thermic ray visioning fire control system allows accurate firing even when traversing rough field conditions, day or night. A TOW anti-tank missile system also complements the defensive capabilities of the Bradley. With a speed of 66km/h on road capability, the M2 IFV is truely a formidable weapons system.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/35 JGSDF Type 61 Tank Model Z 35163
Tamiya Military 1/35 JGSDF Type 61 Tank Model Z 35163
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:35
Material Plastic
Features
This tank has been in use for a long time as the main tank of the J.G.S.D.F. It features modernized equipment and has been recreated in high detail.
About the JGSDF Type 61 Tank
Since being officially adopted by Japan`s Ground Self Defense Force in 1961, the Type 61 tank has been in continuous service for more than 30 years. Although destined to be replaced by the sophisticated Type 74 and the newly introduced Type 90 tanks, it is still considered by many as the center piece of the Japanese Self Defense Forces. Designed from the outset to carry a 90mm main gun, the tank also had to be able to traverse the narrow railways throughout Japan. The result was a very compact medium tank, with a low profile that is only 2.96m wide and 2.46m high, and weighing 35 tons. Its 90mm gun was produced by the Japan Steel Works, Ltd., using the renowned U.S. type M3A1 gun as a pattern. The gun is mounted in a cast steel turret, and elevated either manually or by hydraulic pressure. Loading is manual and capable of firing 15 rounds per minute. Auxiliary armament is a 12.7mm M2 machine gun mounted on the commander`s cupola, and a 7.62mm M1919A4 machine gun mounted co-axially with the main gun. Powerplant is a Mitsubishi Type 12HM21WT, air cooled V-12 cylinder, diesel engine, capable of 570 horsepowers which provides a top-speed of approximately 45km/h. A torsion-bar suspension system was utilized and is matched to the single-pin caterpillar tracks. Minor improvements, such as smoke discharging units, were added to keep this venerable armored vehicle in the front lines of Japan`s self defense operations.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya WW2 German Machine Gunner 1/16 Figure Z 36307
Tamiya WW2 German Machine Gunner 1/16 Figure Z 36307
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:16
Material Plastic
About the Tamiya WWII German Machine Gunner - On Maneuver
Two head part included in the kit including one wearing a helmet and one not wearing a helmet. Helmet can be attached to belt area for figure head not wearing helmet. Figure to be assembled with parts for replication of MG42 machine gun connected shoulder sling. Kit depicts figure in walking pose, and comes with base stand that realistically reproduces the ground. Perfect for assembly in a 1/16 scale diorama. Figure is featured in traditional German Army uniform of WWII era. Decals for replication of insignias are included.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya German Feldmarschall ROMMEL 1/16 Figure Z 36305
Tamiya German Feldmarschall ROMMEL 1/16 Figure Z 36305
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:16
Material Plastic
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Wehrmacht Tank Crewman Model 1/16 Figure Z 36301
Tamiya Wehrmacht Tank Crewman Model 1/16 Figure Z 36301
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:16
Material Plastic
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/35 Howitzer Motor Carriage M8 Z 35312
Tamiya Military 1/35 Howitzer Motor Carriage M8 Z 35312
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:35
Material Plastic
About the US Howitzer Motor Carriage M8
During WWII, the frst American fully tracked Self Propelled Howitzer was the M8. It used the chassis of the M5 and had an open topped turret which was armed with a 75mm Howitzer and 12.7cm M2 machine gun. From September 1942 to January 1944, approximately 1,800 units were produced with the firstM8 seeing action from mid 1943. They were seen used at the Italian and North West European fronts as well as the Pacific Theater for fire support duties. Even after WWII, the M8 could be seen in service with the French army during the Indochina Wars.
1/35 scale re-release of item 35110.
Features of the tank including the open top gun turret`s interior, main gun loading section, gun sight, and the crewman`s seats etc are faithfully reproduced.
Set comes with three figures in realistic poses.
Decals included.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/35 Citroen Traction 11CV Car Z 35301
Tamiya Military 1/35 Citroen Traction 11CV Car Z 35301
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:35
Material Plastic
About the Citroen Traction 11CV - Staff Car
This famous French sedan was produced from 1934 to 1957 and featured a lightweight monocoque body with a high performance torsion bar spring suspension. It also had a spacious interior and featured a front-wheel drive system and a low center of gravity. The car proved to be very easy to handle and was used by the French Army, the occupying German Army, and the Free French forces. It was also used by German forces through out the European front and as far away as Russia.
Features
Length: 125mm, Width: 48mm.
This is a 1/35 scale assembly kit model of the Citroen Traction 11CV.
The elegant form of the body and fenders has been accurately reproduced.
For easy assembly of the suspension, the number of parts is kept in check.
You can choose to assemble either open or closed front doors.
By assembling open front doors, you can enjoy viewing the the highly detailed interior.
Set includes one driver figure.
Markings for the German Army x 2, French Army x 1, and Civilian vehicle x 1 are included.(Total 4)
This model will look great in a diorama on its own or with other 1/35 scale models.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/35 German 88mm Gun Flak36 Kit Z 35283
Tamiya Military 1/35 German 88mm Gun Flak36 Kit Z 35283
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:35
Material Plastic
Introductions
The 88mm Flak 36 Gun was powerful enough to penetrate the armor of Allied tanks such as the Matilda, leading to its effective use as an anti-tank weapon in North Africa. Tamiya`s legendary flagship 1/35 scale model returns with newly designed figures in tropical Africa Corps uniforms. This kit is great for building dioramas involving Rommel`s men in the North African campaign.
Flak 36 anti-aircraft guns made their notorious debut in an anti-tank role at Halfaya during the Battle of Sollum (Operation Battleaxe), June 1941. Firing from concealed positions at short range, they destroyed 123 out of 238 attacking British tanks. The Germans claimed one British tank for every 20 "88" rounds fired at Halfaya. Flak 36 guns serving in Africa performed in both anti-armor and anti-air roles, and were indeed the ace-in-the-hole of the Africa Corps.
1/35 scale assembly model kit of German 88mm Gun Flak 36 - North African Campaign.
Parts for Flak 36 gun have been molded in desert yellow color.
Comes with realistically replicated ammunition cases, 2 types of projectiles and spent shells.
Includes various accessories such as rangefinder, telescope, hammer and stakes.
Comes with Zundapp KS750 motorcycle for even more diorama possibilities.
Choice of three types of markings.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/35 18T Heavy Half-Track FAMO Z 35239
Tamiya Military 1/35 18T Heavy Half-Track FAMO Z 35239
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:35
Material Plastic
About the German 18T Heavy Half Track - FAMO
When a tank became inoperative, the Recovery Platoons were informed of the condition of both the tank and the surrounding road surface. Tanks such as Pz.Kpfw.III and Pz.Kpfw.IV could be towed by a single 18 ton heavy half-track, but heavy tanks such as the Tiger I or Panther required three or more towing vehicles. In that case, about 5m of wire rope was used to link each of the half-tracks together. Except for emergency situations, a draw-bar was used for the tank/half-track linkage instead of wire rope. After the linkage was complete, a commander and signalman boarded the lead half-track, directing the other half-tracks by a series of hand signals. (1/35 scale scene at left measures about 1m 20cm in length)
The proposal for the development of the Wehrmacht half-tracks was first made in 1932. Originally, three half-tracks, designated by their towing capability (5 ton, 8 ton and 12 ton) were designed, until 1936, when a light 3 ton vehicle and a heavy 18 ton vehicle, the largest one in the Wehrmacht, were also added. The 18 ton half track was mainly developed for the towing of 21cm and 24cm artillery howitzer and of course for tank recovery. It could also be used for the transport of over 30 troops.
1/35 plastic assembly kit of the largest half-track in the German Army.
Overall Length: 243mm, Overall Width: 75mm.
Highly detailed model captures the size and tank-towing power of the FAMO.
Realistic treads and suspension.
Synthetic rubber front tires and steerable front wheels for maximum realism.
Rear gate and storage doors can be assembled in the open or closed position.
Tank towing drawbar included.
Can be assembled with or without engine side panels, revealing fully detailed engine.
Engine can be assembled outside of FAMO.
Eight figures (four variations) included.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/35 Sturmgeschutz III Ausf.G Z 35197
Tamiya Military 1/35 Sturmgeschutz III Ausf.G Z 35197
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:35
Material Plastic
About the German Sturmgeschutz III Ausf.G Early Version
Originally intended for infantry support duties, Germany`s Sturmgeschutz (assault gun) and abbreviated "StuG" III first appeared in combat during 1940. It had the durable Panzer III chassis with a completely new superstructure. To keep the vehicles profile as low as possible, the revolving turret was eliminated and the short barreled 75mm L/24 gun was mounted directly onto the hull. As it was mainly intended for close fire support for the Wehrmacht, it was used as self-propelled artillery against the opposing enemy`s strategic points. However, when the German forces encountered the Russian KV and T-34 tanks on the Eastern front, the situation abruptly changed. To cope with this Russian tank threat, the Germans were forced to upgrade their existing weapons systems. The G-type StuG III built from late 1942 onwards, used a more powerful, long barrel 75mm L/48 gun. The early G-type had a square shaped gun mantlet. The superstructure was redesigned and an MG42 machine gun with shield, commander`s vision cupola and smoke dischargers were added. The thin steel plates, known as Schurzen (skirts) were attached to the sides of the hull beginning in the spring of 1943. The type-42 assault gun mounted a 105mm howitzer on the StugG III chassis and was developed to fulfill the StuG III`s original role of infantry support. Incorporating several minor changes, about 7,800 G-type StuG III`s were produced.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/35 Panther Type G Late Ver. Z 35176
Tamiya Military 1/35 Panther Type G Late Ver. Z 35176
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:35
Material Plastic
Because of its many advanced and innovative features, the World War II German Panzerkampfwagen V, known as the "Panther" tank, is still considered by many ordnance experts as a weaponry masterpiece. The development of the Panther came about due to the successes generated by the Russian T-34, which has become a serious threat to the German forces during the mid part of the conflict. Mass production of the Panther began during the spring of 1943, and with its sophisticated mechanics and powerful Type 42 L70, 70mm main gun, the Panther tank demonstrated its formidable strength during front line action shortly after its introduction. Several improvements were suggested following its initial employment, resulting in the Panther Type G, which began to appear in spring 1944. Major improvements consisted of additional side armor slope angles and simplified assembly refinements for mass production. Early version model of the G type had a semi-cylindrical main gun mantlet which resulted in a shot-trap due to its shape. Shells were deflected downward through the hull or into the turret causing serious damage. This was improved on the late version model by adding a vertical lip on the lower end of the mantlet. A modified engine room deck with an improved air intake grille and ventilator housing are some of the other distinctive exterior features seen on the late version type G Panther.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/35 Panther Type G Early Ver. Z 35170
Tamiya Military 1/35 Panther Type G Early Ver. Z 35170
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:35
Material Plastic
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Aircraft 1/100 Dassault Mirage III C Z 61603
Tamiya Aircraft 1/100 Dassault Mirage III C Z 61603
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:100
Material Plastic
The Mirage jet fighter featuring delta wings was developed by French aviation company Dassault. The first production model was called III C with official deployment starting in 1961. Boasting a maximum speed of Mach 2.2, the Mirage III was used by the Israeli Air Force in 1967 when fighting against Mig 21 and Su-7 used by the Arab nations.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Aircraft 1/100 MiG-21 Fishbed-F Model Z 61602
Tamiya Aircraft 1/100 MiG-21 Fishbed-F Model Z 61602
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:100
Material Plastic
The supersonic jet fighter, the MiG-21, was developed by the former Soviet Union with production numbers reaching more than 10,000 aircraft. Deployed to the Vietnam War and the 1967 War in the Middle East, the MiG 21 fought against American F-4 Phantom, F-105D Thunder Chief and Israeli Mirage III.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/700 JAP. AYANAMI Destroyer Z 31405
Tamiya Military 1/700 JAP. AYANAMI Destroyer Z 31405
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Scale: 1:700
Material Plastic
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/700 JAP. Light Cruiser NAGARA Z 31322
Tamiya Military 1/700 JAP. Light Cruiser NAGARA Z 31322
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Scale: 1:700
Material Plastic
About the Nagara Light Cruiser Kit
After the First World War, naval forces around the world began competing with each other in constructing larger and more powerful battleships. This was based on the "Big Guns" principle of the time, where battleships with large claiber weapons would be the main force in any future naval engagements.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/700 JAP. Light Cruiser KINU Z 31321
Tamiya Military 1/700 JAP. Light Cruiser KINU Z 31321
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Scale: 1:700
Material Plastic
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/700 JAP. Light Cruiser YUBARI Z 31319
Tamiya Military 1/700 JAP. Light Cruiser YUBARI Z 31319
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Scale: 1:700
Material Plastic
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/700 JAP. Light Cruiser YAHAGI Z 31315
Tamiya Military 1/700 JAP. Light Cruiser YAHAGI Z 31315
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Scale: 1:700
Material Plastic
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/700 Aircraft Carrier SHINANO Z 31215
Tamiya Military 1/700 Aircraft Carrier SHINANO Z 31215
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Scale: 1:700
Material Plastic
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/700 Aircraft Carrier JUNYO Z 31212
Tamiya Military 1/700 Aircraft Carrier JUNYO Z 31212
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Scale: 1:700
Material Plastic
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/700 JAP. Battleship MUSASHI Z 31114
Tamiya Military 1/700 JAP. Battleship MUSASHI Z 31114
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Scale: 1:700
Material Plastic
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Space 1/100 Space Shuttle Orbiter Model Z 60401
Tamiya Space 1/100 Space Shuttle Orbiter Model Z 60401
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Scale: 1:100
Material Plastic
The space shuttle basically comprises an orbiter, external fuel tank (ET) and two solid fuel rocket boosters (SRB). The orbiter plays the most important role, while the external fuel tank and rocket boosters are means for sending the orbiter into space. When the space shuttle is launched, the external fuel tank carries one rocket booster on each side and the orbiter on its back. The orbiter detaches the external fuel tank and rocket boosters on the way and performs various duties in space. It comes back to the Earth and undergoes maintenance and repair. Then, it is launched again with an external fuel tank and rocket boosters. At the time of launching, the whole space shuttle is about 56 meters long and weighs about 2,000 tons. It takes off with a thrust nearly 3,000 tons by fully operating the two rocket boosters and the three main engines of the orbiter.
Most of the surface of the orbiter is covered with tiles made of silica of very high purity. These tiles are classified into two groups. One for high temperature and the other for low temperature, and these are used accordingly. Parts which become extremely hot such as the nose and the front edge of the wing are covered with heat resistant material of reinforced carbon. These heat resistant materials protect the orbiter from heat of friction which exceeds 1,400 degrees celcius in some parts at the time of launching or reentry into the atmosphere. Thus, they make it possible to use the orbiter no less than 50 or 100 times.
The fuselage of the orbiter is partitioned into the cockpit and crew compartment in front, payload compartment at the center for carrying cargo, and engine room at the rear. The crew are four to seven. In addition to two pilots and one mission controller who controls the flight plan, the orbiter can carry four scientists and payload controllers who load and unload cargo for operation and experiments in space. This is a characteristic feature of the orbiter not ever seen in conventional spaceships. Furthermore, the scientists need only a few weeks training before getting in the orbiter. No space suit is needed inside it and they can act in ordinary clothes.
The payload compartment is of a cylindrical shape 4.5 meters in diameter and has a cargo rack 18 meters long. Its top consists of large doors which open right and left from the center. Various things are put in this compartment. the maximum capacity is 29.25 tons.
NASA`s spacecrafts are currently used for human spaceflight missions. The Orbiter is commonly used as a means of transportation for astronauts and is also used for delivery of scientific equipment, satellites, and so on. The Space Shuttle is well-known around the world, and gets plenty of attention in Japan thanks to the exploits of Japanese Astronauts Mr. Mamoru Mori and Ms. Chiaki Mukai. Mr. Mori is a veteran of two space flights and trained and worked as a Payload Specialist. Ms. Mukai has also taken part in two space flights as a Payload Specialist, and is famous for being the first Japanese woman to go into space.
Features
Special re-release of the 1/100 Space Shuttle Orbiter plastic model.
The new kit package features an awe-inspiring image of space.
Kit also includes new slide decals to depict current space shuttle markings.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Automotive 1/20 McLaren Honda MP4/4 Car Z 92208
Tamiya Automotive 1/20 McLaren Honda MP4/4 Car Z 92208
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:20
Material Plastic
About the McLaren MP4/4 with Driver
Debuting at the opening round of the 1988 Formula One Season, the McLaren Honda MP4/4 dominated throughout for an incredible 15 wins. Although handicapped by 150L fuel restrictions and reduced boot pressure, the RA 168 V6 twin turbo engine demonstrated excellent fuel efficiency and higher power output than the 3.5L naturally-aspirated engines. Chief engineer Steve Nicols designed a compact, streamlined chassis capable of taking full advantage of the powerful Honda engine. The dream combination of Alain Prost and Ayrton Senna took the MP4/4 to an overwhelming victory in the final year of turbo F1 racing.
Features
1/20 scale plastic model of the 1988 Formula One Champion car McLaren MP4/4, considered one of the most dominant machines in F1 racing.
Body cowl may be removed even after assembly to display view of internal mechanics such as V6 turbo engine, radiator and intercooler.
Features durable and accurately replicated ABS resin suspension arms.
Solid rubber tires add realism to this top quality model.
Includes markings for A. Senna and A. Prost.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/700 JAP. SHIKINAMI Destroyer Z 31408
Tamiya Military 1/700 JAP. SHIKINAMI Destroyer Z 31408
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Scale: 1:700
Material Plastic
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/700 Tugger Set Toy Model Z 31509
Tamiya Military 1/700 Tugger Set Toy Model Z 31509
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Scale: 1:700
Material Plastic
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/700 Battleship BB-63 MISSOURI Z 31613
Tamiya Military 1/700 Battleship BB-63 MISSOURI Z 31613
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Scale: 1:700
Material Plastic
A plastic assembly kit of the U.S. Navy Battleship Missouri.
1/700 scale
Overall length: 386.5mm
Overall width: 47mm
The long and narrow form of USS Missouri`s hull has been accurately replicated.
Missouri`s characteristics such as the main structure coupled with the front funnel have been reproduced.
The hull has been divided in two halves in order to reproduce the finest details.
The finest details of the main structure and the masts have been accurately recreated.
The main turrets can rotate after completion via polycap.
Equipment such as armament including 40mm and 20mm guns are sharply reproduced.
Kit includes two types of floatplanes, Vought OS2U Kingfishers and Curtiss SC-1 Seahawks.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Aircraft 1/100 F-105D Thunderchief Model Z 60029
Tamiya Aircraft 1/100 F-105D Thunderchief Model Z 60029
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:100
Material Plastic
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Aircraft 1/100 SAAB AJ37 Viggen Model Z 60011
Tamiya Aircraft 1/100 SAAB AJ37 Viggen Model Z 60011
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:100
Material Plastic
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Aircraft 1/100 Lockheed F-104J/G Model Z 60008
Tamiya Aircraft 1/100 Lockheed F-104J/G Model Z 60008
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:100
Material Plastic
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Aircraft 1/100 Douglas A-4E Skyhawk Toy Z 60003
Tamiya Aircraft 1/100 Douglas A-4E Skyhawk Toy Z 60003
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:100
Material Plastic
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/700 Aircraft Carrier HORNET Z 77510
Tamiya Military 1/700 Aircraft Carrier HORNET Z 77510
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Scale: 1:700
Material Plastic
Because this product is incomplete model,?buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/350 JAP. YUKIKAZE Destroyer Z 78020
Tamiya Military 1/350 JAP. YUKIKAZE Destroyer Z 78020
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Scale: 1:350
Material Plastic
About the Japanese Destroyer Yukikaze
January 20 1940 saw the completion of construction of the Japanese Kagero class destroyer. Along with her sister ships Hatsukaze, Amatukaze, and Tokitukaze, she became part of the 16th destroyer division under the command of the light cruiser Jintsu. At the beginning of WWII, the 16th destroyer division was part of the force which captured the Philippines, and on December 5 1941, she took part in the fierce fighting with American forces near Palau and supported the invading forces at Legazpi. After wards, she saw action throughout the Pacific Ocean at the Dutch East Indies, Midway, Guadalcanal, and the Solomon Islands. The Yukikaze also participated in the withdrawal of Guadalcanal,also participated in sea battles at the Marianas and the Leyte Gulf. Throughout WWII, the Yukikaze took part in numerous naval battles, escort duties, and supply runs, and always returned safely from each sortie. She was among the few Japanese warships and the onl yone of her class still operational at the end of the war, and can be called the "lucky destroyer." As part of the post-war reparation agreement, the Yukikaze was transferred to the Republic of China, and in 1966 she became a reserve training ship.
Features
This is a 1/350 full display model.
Model depicts the Yukikaze as she appeared during the 1945 Ten Ichi Go operation (Battle for Okinawa).
Parts included to build a waterline model or a display model with full hull.
It is possible to rotate the guns and torpedoes after assembling thanks to polycaps.
ABS has been used for the masts to ensure strength.
Photo-etched parts are prepared for the ladders, radio antennas etc.
Metal chains.
Display stand included.
Assembled model can be displayed in the package.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/350 DD445 FLETCHER Destroyer Z 78012
Tamiya Military 1/350 DD445 FLETCHER Destroyer Z 78012
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Scale: 1:350
Material Plastic
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/700 KING GEORGE V Battleship Z 77525
Tamiya Military 1/700 KING GEORGE V Battleship Z 77525
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Scale: 1:700
Material Plastic
About the British King George Battleship
The ship was launched on Feb 21, 1939 and completed for service on Oct 1,1940 by which time World War 2 had already been fought for a year. After a trip to USA, she covered the Lofoten raid (March 1941) and Atlantic convoys before becoming flagship of the British Home Fleet in April 1941. In May 1941 she led the chase of the German Bismarck and saw action for the first time. Through 1941-42 King George V took part in numerous search and escort operations in the Atlantic and in May 1943 she went to the Mediterranean taking part in all the big naval operations covering the Allied invasion of Sicily and Italy. After refitting in England she went East as flagship of the second in command of the British Pacific Fleet. In Task Force 57 (later 37) she was part of the big Anglo-American naval force in the Okinawa operations and operations against Japan. In 1946 she became flagship of the British Home Fleet once more, the war now over, and in 1947-49 she served as a training ship before paying off into the Reserve Fleet in 1950. She was scrapped in 1957 along with her sister ships Howe, Anson, and Duke of York. A furthersister ship Prince of Wales was sunk by Japanese forces in 1941.
During her service life King George V underwent minor changes of armament. In 1940 she had four unrating rocket projectors for use against aircraft, but these were soon removed. She later had pom pom armament doubled and many 20 mm Oerlikon guns replaced the 0.5 inch machine guns.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/700 US Battleship BB-61 IOWA Z 31616
Tamiya Military 1/700 US Battleship BB-61 IOWA Z 31616
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Scale: 1:700
Material Plastic
Introductions
With our 1/700 scale Missouri and New Jersey making waves in the modeling world, we`ve
added fuel to the fire with our first ever model of the USS Iowa! This high quality model depicts
the Iowa, namesake and first of the Iowa class battleships, as she appeared in WWII.
About the US Navy Battleship BB-61
Commissioned in February 1943, the USS Iowa served briefly in the Atlantic before departing
for the Pacific Theater in January 1944. She served mainly to support carrier based air
strikes against Japanese-held islands, protecting said carriers and shelling enemy shore
and naval positions. She took part in the Marianas campaign and the Battle of Leyte Gulf,
although she missed a chance for a showdown with the Japanese battleship Yamato. After
assisting the assault on the Philippines, Iowa took part in the Okinawa invasion as well as
supporting air strikes on Kyushu. Together with sister ships USS Missouri and USS Wisconsin,
Iowa bombarded industrial cities on the Japanese homeland towards the end of the war.
Features
Highly detailed 1/700 scale assembly model of the USS Iowa.
Model depicts Iowa as she appeared during the Marianas Campaign in 1944.
Model accurately captures differences with the USS Missouri such as open bridge, bow,
observation deck, radar antenna and 20mm guns on top of Number 2 turret.
Left/right hull halves design offers easy assembly and ultra-realistic finish.
Main turrets can rotate after completion thanks to polycaps.
Equipment and armament such as 40mm and 20mm guns reproduced in faithful detail.
Full color finishing guide shows how to paint Measure 32/1B camouflage as used in the
Marianas Campaign.
Kit includes detailed models of Vought OS2U Kingfisher floatplanes.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Military 1/700 US Navy BB-62 NEW JERSEY Z 31614
Tamiya Military 1/700 US Navy BB-62 NEW JERSEY Z 31614
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Scale: 1:700
Material Plastic
Introductions
Following the release of the 1/700 scale BB-63 Missouri in July of 2004, Tamiya introduces our second U.S. battleship to the Waterline Series, the BB-62 New Jersey.
1/700 scale Waterline Series model of the BB-62 New Jersey following 1982 reforms.
Accurate reproduction of changes made in 1982 including lattice style mast, and Tomahawk and Harpoon launchers.
40.6cm triple guns are moveable thanks to use of polycaps.
SH-60 Sea Hawk helicopter included for quality realistic finish.
Includes a large, detailed painting reference chart.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
New Arrival! Tamiya Automotive 1/20 Team Lotus Type 78 1977 Z 20065
Tamiya Automotive 1/20 Team Lotus Type 78 1977 Z 20065
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide
Specifications
Scale: 1:20
Material Plastic
About the Team Lotus Type 78 1977 with Photo Etched Parts
Lotus has brought a number of innovations to F1 racing since they entered their firstrace in 1958. The introduction of ground effect cars, the result of their aerodynamics research, was one of the highlights. In 1977, Lotus introduced the Type 78 (base model for the Type 79) which had a slim monocoque chassis and wide side pontoons with under surfaces like inverted aircraft wings. Airfow beneath the side pontoons thus enabled the body to generate downforce for stronger traction and faster cornering speeds. Mario Andretti and Gunnar Nilsson drove the car in the 1977 season, and despite early season troubles, they went on to take 4 and 1 wins respectively to prove the car`s potential.
1/20 scale highly detailed plastic assembly model kit.
Length: 225mm, Width: 102mm.
The low profile, sharp form of the Lotus has been faithfully reproduced.
Body cowlings may be removed to showcase the detailed cockpit and engine.
The inverted aircraft wing-shaped under surfaces of the side pontoons are precisely reproduced.
Mechanical aspects of the Lotus including the DFV engine, transmission, and suspension has been remodeled in rich detail.
Decals to depict both No.5 and No.6 cars seen at the British GP included.
Side mirror surfaces and instrument panel depicted with metal transfers.
Parts such as brake-discs, radiator, rear wing stay are depicted with Photo-etched parts.
The tire profile seen on the Lotus during the 1977 F1 season hs been faithfully replicated.
Add greater realism to your model with Item 1/20 12637 Seatbelt A.
Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.
Remote Controlled Toys Online Shop: www.rcecho.com
We highly recommend the follow RC TOYS model, We accept Wholesale order worldwide, We also sell onEBAY.COMaccept PAYPAL and Credit Card
4x O.S. ENGINE Glow Plug P8 Cold USD24.90 only
RC Model 5.5mm Hexagon Screw Adjustment Driver USD5.90 only
Biplane RC 2ch Infrared Blue Mini Airplane RTF USD17.90 only
AXI Gold Line 2203RACE Outrunner Brushless Motor USD56.90 only
RC Ship 95mm Blue Aluminium Cooling Boat Rudder USD8.90 only
Hirobo SRB Quark 0302-003 S.R.B Center Hub Blade Holder USD19.90 only
Futaba 2PL 2ch 2.4GHz Transmitter R603GF Receiver USD117.90 only
RC Smart 2410 KV Outrunner Brushless Motor & 30A ESC USD18.90 only
APC Electric 15 x 4 E RC Composite Propeller USD9.90 only
Tamiya Military 1/35 British CENTAUR C.S.Mk.IV 35232 USD25.90 only
G.T.POWER A6 Digital LiPo Li-polymer Balance Charger USD37.90 only
OS ENGINES O.S. MAX 18CV-RX Blue 11J Engine 11880 USD133.90 only
Tamiya Motorcycle 1/12 YAMAHA YZR-M1 50th Edition 14115 USD32.90 only
iMAX B5 Intelligent Digital Li-polymer Balance Charger USD24.90 only
Tamiya Mini 4WD 1/32 SHAO BAI RON Z 19503 USD10.90 only
Yokomo TW-1913 Drift Master 6-Spoke Wheels x2 pcs. USD10.90 only
Tamiya Military 1/48 Italian Armored Car AB41 89778 USD22.90 only
KDS Model RC Screw Driver Adjustment Tools (9pcs) USD13.90 only
LEOPARD Model 4065 KV1400 4 Poles Brushless Motor USD64.90 only
SG-50 5g RC Airplane & Helicopter Micro Servo USD4.90 only
Posts
No comments:
Post a Comment