Friday, January 15, 2010

Charge your transmitter and receiver batteries safety


Thank you for interesting a CR-2000. The CR-2000 is a quick charger for the nickel cadmium and nickel metal hydride battery used in radio control transmitters, receivers, and glow boosters. Since this charger can charge the battery faster than ordinary chargers for home use, that much more care is required. To fully display the performance of the charger and to use safely, please read this instruction manual thoroughly before use.



Specifications
•Dimensions: 151 x 85 x 35mm
•Input Voltage: DC 11-15V (low battery display at 10.5V)
•Operation Voltage: 10.5V
•Suitable Battery: Ni-Cd, Ni-MH
•Charging Current: TX: 0.5-2A, RX: 0.05-2A, Glow: 1-2.5A
•Batteries Range: TX: 6-8 cells / 500-2000mAh, RX: 4-6 cells / 50-2000mAh, Glow: 1 cell / 1000-2500mAh
•Cut-off: Delta Peak •Display: LCD with Back-light
•Safety Device: Over load, Reverse polarity protected

Features
Nickel cadmium and nickel metal hydride batteries for transmitter, receiver, and glow booster can be charged.

Auto cut by peak voltage detection.

Transmitter and receiver batteries or transmitter and glow booster batteries can be charged simultaneously.

The charging current can be changed. Transmitter: 0.5A~2.0A(0.1A steps), receiver: 0.05A~2.0A(0.05A steps), glow booster: 1A~2.5A (0.5A steps).

The input voltage, output voltage, charging current, peak voltage, charging time, and charging amount can be monitored on an LCD display.

Detail Information by www.rcecho.com

www.rcecho.com

No comments:

Post a Comment